Check the drain hose for obstructions and the pump filter for blockage. the filter is under the tub with a turnscrew cap on it. Get a bucket ready to catch the water or **** it out with a shop vac using the drain hose.

Here are a few pics to show what your looking for. Different models have them in different places.

Feb 27, 2011 | Hotpoint WMA50 Front Load Washer

1 Answer

When the machine is washing the goods water comes from under the machine .T the bottom hose has just been replaced Does the machine have a filter and can it block and where is it

The filter can get blocked, it is located at the rear of the washer.
Remove lower rear panel of washer, locate and remove large black hose on bottom of drum.
Remove and clean filter inside the hose.

Nov 29, 2010 | Hotpoint WMA50 Front Load Washer

1 Answer

Where is the water filter kept on the hotpoint aquarius wma50

Remove lower rear panel of washer, locate and remove large black hose fastened to bottom of drum, filter is located inside the hose.

Sep 19, 2010 | Hotpoint WMA50 Front Load Washer

1 Answer

I need to clean the filter.

Hi.
To clean filter, follow details as listed.
Remove lower rear panel of washer.
Locate and remove large black hose fastened to bottom of drum.
Remove and clean filter inside hose.
Remove the hose onto the pump, and check for obstruction here and in the pump.
This should solve your problem.

Dec 05, 2009 | Hotpoint WMA50 Front Load Washer

1 Answer

My Hotpoint wma50 1000spin is not pumping out all the water

Check /clean filter its located next to sump hose ..Switch off pull plug 1st ..

Oct 02, 2009 | Hotpoint WMA50 Front Load Washer

1 Answer

Hi, i have a hotpoint aquarius 6kg wma50, my

Have you checked for blockage in the pump. Or the have been some problems with a ball that sits in the hose between pump and the drum. This can block the water. Check this berfore purchase new pump.

Jul 26, 2009 | Washing Machines

1 Answer

Hotpoint WMA50 won't final spin, and water stays in drum

Running with a restricted water supply probably took out the pump.
The stator requires a steady water supply for cooling and lubrication. Without this accelerated wear between the stator & magnetic poles occurs.
This additional clearance makes the magnetism insufficient to spun the impellor.

Oct 17, 2017 | Hotpoint WMA50 Front Load Washer

1 Answer

Noise when draining

U will find the filter by removing the lower rear panel of the m/c.
Locate the large black hose at the right side, and remove clip securing hose. Get some thing ready to catch any water that will be in there, and remove hose.
There u will see the filter, remove and clean, refit filter and hose,making sure that u get the hose on properly, test for leaks before u put the panel back on.
U will find this much easier to do if u tilt the m/c forward, and support it with something underneath.. Check inside the pump as well.
Plz rate my solution.

Thanks.

Dec 31, 2008 | Hotpoint WMA50 Front Load Washer

Not finding what you are looking for?

View Most Popular

WMA50 Front Load Washer

Washing Machines

I have a Hotpoint WMA50 it does not drain. It spins but water stays in machine can you help please

Washing Machines

Open Questions:

0 Answers

My hotpoint washer won't spin when it gets to the spin cycle

Jun 09, 2014 | Hotpoint WMA50 Front Load Washer

0 Answers

pre wash light flashes machine stops Possible over fill on water as when it gets to half way up door the pre wash light flashes and every thing stops, will do spin and drain though?

Mar 28, 2014 | Hotpoint WMA50 Front Load Washer

0 Answers

Door locked light

Feb 07, 2014 | Hotpoint WMA50 Front Load Washer

0 Answers

how to replace pressure switch on hotpoint aquarious wma50s washer fails to switch to 'END' light after any programme after final spin

Jan 20, 2014 | Hotpoint WMA50 Front Load Washer

See all Hotpoint WMA50 Front Load Washer Questions

Ask a Question

Usually answered in minutes!

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for Hotpoint WMA50 Front Load Washer? Or just drag it here!

Location of pump filter wma50 - Hotpoint WMA50 Front Load Washer

Add Your Answer

Attachments: Added items

Related Questions:

I have a Hotpoint WMA50 it does not drain. It spins but water stays in machine can you help please