Wont load the front page comes up but the menu or playlist wont load or display on my wireless smart t.v.

There are as many possibilities as there are when trying to find a needle in the haystack. The first think to look for is the WiFi is in range. How o you do the Internet on TV, cable, Wireless or... I don't know unless you spend little more time next time you write a problem on FixYa. You first need to explain whether it is cable connection to the TV, which is a bit impossible, unless your smart TV has wireless connections. Other things that you need to check is the wireless range seen on the TV (those tiny bar-graphs usually seen at the bottom right of the screen), are they all active? They're usually 5 little vertical bars. If the Wireless is fine, you can be sure you will have the Internet, no matter what. If it is not loading you have to reset the code to match the wireless signal of your ISP. Better still, your TV is really a modern one, since it is a Smart TV and it comes with a Manual you cannot fail to understand. Read it carefully under the 'Wireless Connection' section and you cannot go wrong. Panicking over nothing doesn't get you anywhere closer to a solution to your problem. Like computers, Smart TV requires an Internet Service Provider (ISP) and a Wireless Modem to start with. Do you still feel confused? Then try this link below. It may help you... http://www.knowhow.com/article.dhtml?articleReference=1246&country=uk ...or, lastly, contact Hitachi.

there are a couple things you can try. 1. you can try deleting the software and re downloading it all and see if that works. 2.you can try to unplug it from the wall outlet and leave it sit for about 5 to 10 minuets and then plug it back in.

Hi,

What you require is perhaps possible using Playlists. Here is how you'd create a Youtube Playlist after you Log In to YouTube (This is from the YouTube help page - http://www.google.com/support/youtube/bin/answer.py?hl=en&answer=57792):

1. On your Video #1, Click the arrow next to the + Add to button under the video you're watching.
2. From the drop down menu, choose New playlist..
3. You'll be taken to a page where you can set the properties for your Playlist.
4. Type in the name of your New Playlist and hit Enter on your keyboard. You'll see a message saying, Saved to your playlist.

Once the playlist is created, do these for all the videos that you'd like to play in sequence:

1. Click the arrow next to the + Add to button under the next video you'd want to watch.
2. From the drop down menu, select the playlist you want to add your video to.
3. Repeat Steps 1 & 2 for as many videos as you like.
   

Then in the Playlist, you can choose to play the videos sequentially.

Hope this helps.

-regards,
Mrigs

There are two ways in which you can add a playlist....
1......by using your playlist via the player...
2......or by creating one using the computer....

First lets see the one using the player...all you have to do is go to the song navigate option...highligh the song that you wan to add to your playlist and then click the record button.you will be given two choices..one add to my playlist and two erase.....click the add to my playlist option and you will have the song added to you r playlist.....

second method is create a normal playlist using windows media player with the correct directories in the player and then copy the file to the player...
now when you press the menu button for a second or two in the songs menu...you will be displayed two choices....one file navigator and the other is playlists....
click the playlists option to access the playlists....

make sure you put the correct password in, re do the connection and retype the password, thats what it sounds like

Netgear have obligingly put it on their web site, so rather than look good and steel their thunder, here's the URL:-

http://kb.netgear.com/app/answers/detail/a_id/112

You need to set up network security on both the router and the computers you connect to it. Log in to the web settings page (probably https://192.168.0.1) for the router and you'll find a security tab.

try using windows media player to sync and rip songs to your mp3 player it should recognize it and work with it

Are you creating playlists with Musicmatch or are you creating them directly on the DJ?

Let's say you have a playlist on your DJ and want to add a track to it. First, play the playlist. While it is playing, go to Music Library, find the track you want to add, select it with the thumbwheel, one of your choices in the menu that comes up is "Add to Selected". Select "Add to Selected". Now when the DJ reverts back to the screen showing the track being played. Hit the thumbwheel twice. A menu comes up. Select "Save as Playlist". Name it. Then delete your previous version of the playlist. Your new version will include the track (or tracks) you added.
Okay, that answered your specific question, but let me tell you it is much easier to build and organize, and yes, edit and/or add to your playlists from musicmatch.
After loading musicmatch, up near the top is a button called playlists. On its menu, select Playlist Manager. The window that opens has buttons that will let you create new playlists or modify old ones. You can dock your dj and edit the playlists on it from here or build playlists and then Send them to Portable Device (your DJ) Fairly easy.