Kodak DX4330 memory card formatting problem

To correct a Memory Card Lock:
one the side of the memory card is a plastic toggle switch, slide it down and up again to reset the switch and then stick it back into your camera.. see if that fixed the problem.

SD SDHC Card Problems and Fixes Card Locked Card Error No Memory Card...

Memory cards need to be formatted before use. Please refer to your camera manual for instructions.

Your camera may not work with 8GB SDHC cards, only with SD cards 2GB or smaller. Such cameras will report a card error and/or request formatting if you try to use an SDHC card.

If you require further assistance, please add a comment to this question and specify the model of your Kodak EasyShare camera.

What model Kodak camera? Are you sure you have an SD card, 2GB or smaller? Many Kodak models won't work with higher-capacity SDHC cards.

The DX4330 uses SD cards, not SDHC cards. While SDHC cards will fit into the slot, they are electronically incompatible and will not work. You need to go with SD cards 2GB and smaller.

Try turning the camera off and then back on.Ensure that the memory card is the proper type for the camera. If the memory card is the proper type, try re- formatting the card using the Format option in the Delete sub-menu of the Playback Menu. If it will not format, it is probably corrupted. Replace the memory card

Your camera is only supporting SD/MMC Cards (up to 2 GB) and KODAK SDHC Cards (up to 8 GB).
The card that you currently have might be faulty. Please try another card.
You might also need to switch the camera over to saving pictures directly onto the SD card.1: Menu, Cam settings, Chose AUTO or SD card option Press OK
Note: If the SD card isn't in the camera or is unreadable the camera will automatically go back to saving you taken pictures on the internal memory.

The lever on your SD card might be turned the wrong way so it is reading protective. Pls. turn the lever.

Your camera Memory card support is: SD/MMC up to 2 Gigabyte.
If you use any other card. the camera could give you a message like the one you're experiencing.

Try with a different SD card that is supported by the camera.

An OoW. repair for this model for this fault is about 48 pouonds + shipping. KODAK also offers a Trade up option where you will have the opportunity to trade up to a newer model 25-30% cheaper than the market price.

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

If helpful pls. rate me and/or recommend me TXS

She is not arguing with the camera. Sheesh. When she says she hits "continue" she is talking about continue for the camera to format the card. But instead of formating the card it says filesystem error e00100. The camera will NOT format the card. I have the same problem. I can format the card on the computer, but again the camera says it can not read the card and needs to format. You choose to format, and it says filesystem error e00100. My card is brand new. So I used cards I have owned for while and used in other cameras. Same thing happens. I tried 4 different cards. A 4gb SDHC, thought that format was not compatible so switched to a regular SD 2gb. Same thing happened. Also tried Standard SD 16mb & 128 mb. All do the same thing.

sometimes it does.
if your old card is working and the new card isn't chances are they are not compatible.

just like what they would say... we know that manufacturers would say.. it should work, if it doesn't try another one.

if both cards are not working them there is something wrong with the camera.

No the Brand would not make any diffrence if the memory card doesnt get formatted on the camera itself u can try to format it on the computer............ Just insert the memory card into the camera connect the camera to the computer goto my computers there u will see the camera removable disk which is the memory card...... Right click on that click on format and format it........Then try to use it on ur camera i am sure it will work fine..............