Question about Office Equipment & Supplies

2 Answers

Error code U9

Hi I have the error code U9 showing on my Olivetti Copia 9814. The book says switch it off for 5 secs then try again. Well, this works each time but only for 1 or 2 copies. I bought this machine while I was 'in the trade'I had a small office machinery company till 2001 when I sold up so if you can point me in the right direction I should be able to get spares or repair it myself.

many thanks
Chris

Posted by Chris Hornby on

  • Chris Hornby Dec 29, 2011

    Hi

    I had not been on Fixya for years until the current problem arose. I hadn't received notification of your possible solutions by email so I didn't know you had responded.

    I just wanted to thank you both for your time an help. it was a HV problem and I decided to scrap the machine as it wasn't worth the repair.

    many thanks
    Chris

×

Ad

2 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 12 Answers

U9 is HVPS output leakage.... current leak in any corona, check & clean two coronas, also check mag roller current leak;

Posted on Aug 08, 2010

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 69 Answers

Hi im jules_09,are you sure its an error code?chek first all sensor on front door and other parts of the copier that has a sensor,

Posted on Nov 03, 2007

  • Anonymous Nov 05, 2007

    and also sometimes its not an error code must be a door open

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Olivetti d-Copia 200 how do I rest maintenance counter?


http://www.manualslib.com/manual/529074/Olivetti-D-Copia-200mf.html?page=126#manual

Tells you how on page 4-10 above.
The attached link allows you to read whole instruction book online by either entering page x of xx at the top or scrolling previous and next with the arrows. Hope it is for the correct model and that helps.

Oct 08, 2015 | Olivetti Office Equipment & Supplies

1 Answer

How do i solve olivetti d-copia 253mf error code 6000?


my dear you press 10871087 after you slect 163 and press print baten

May 11, 2014 | Olivetti Office Equipment & Supplies

1 Answer

Olivetti copia 9017 RESET ERROR E0000


Olivetti copia 9017 haw to RESET ERROR E220

Jan 09, 2014 | Office Equipment & Supplies

1 Answer

Olivetti d-copia 16w error code H4


I need driver olivetti_d_copia_16w for winXp....

Sep 25, 2012 | Olivetti Office Equipment & Supplies

2 Answers

I HAVE A COPIER RICOH AFICIO 2022 SP WITH THE CODE SP 545 BUT I WANT TO KNOW WHERE IS THE THERMISTORS TO CLEAN IT


Thermistor is in the fuser. Open right cover and you see the fuser. On a fuser have some labels "Hot Surface" "Danger... or something

Jan 24, 2011 | Ricoh Aficio 2022 Black and White Copier

1 Answer

Need Operating Instructions to send with printer.


Hi Marion,

Are you sure about the product code?
Can you just check it once more and confirm it?

The link to the Olivetti Support is,

Olivetti Support

Try to figure out whether your product is matching in their list.


-rate if it helped you

Apr 10, 2010 | Office Equipment & Supplies

1 Answer

Xerox 5328 copier error


U9-3
Xerographic process problem.

The Exposure sensor detected low Exposure Lamp intensity. Switch the Main Power Switch off then on in order to clear the Status Code. Go to the U9-3 Xerographic Process Problem RAP

U9-4
Xerographic process problem.

The Main PWB sensed that the Toner Dispense Motor was not running. Perform 20-3 U Codes Clearance . Go to the U9-4 Xerographic Process Problem RAP

U9-5
Xerographic process problem.

The CSDC zero point was too high during auto setup. Perform 20-3 U Codes Clearance . Go to the U9-4 Xerographic Process Problem RAP U9-5 Xerographic Process Problem RAP .

Aug 09, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

242 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

The Knight
The Knight

Level 3 Expert

76416 Answers

Brad Brown

Level 3 Expert

18438 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...