Hitachi Ultravision P50S601 50 in. Plasma HDTV Logo

Related Topics:

A
Anonymous Posted on Apr 19, 2014
Be the first to answer

Hitachi p50s601 blue light blinks 3times - Hitachi Ultravision P50S601 50 in. Plasma HDTV

Answer This Question

3 Related Answers

Anonymous

  • 616 Answers
  • Posted on Aug 30, 2009

SOURCE: Hitachi Plasma P50S601 no picture sound OK

probably needs new scan drive board along with upper and lower buffer boards. it wont be cheap and its best to have a tv shop do it.

Ad

Anonymous

  • 2 Answers
  • Posted on Oct 25, 2011

SOURCE: my hitachi p50s601 turns on for 1 second and then

3 Blinks means one of the buffer boards is bad. The way to test it is to unhooking one SDR board at a time, and see if half of your screen comes on properly. If the SDR-D board is bad the bottom half of the screen won't come on when you remove the board. Send it out for repair (less expensive then buying a replacement board) or search for a refurbished board. If your non technical provide this info to a service tech and ask for an estimate. Cost will be moderate. Hope this helps you. Jon

umar magaray

  • 56 Answers
  • Posted on Mar 02, 2012

SOURCE: We have a Hitachi P50S601, Ser # V7L019070, plasma TV. Turned it on and the power indicator light goes from blue to a blinking red light (Stand By Mode). The TV is connected to DIRECTV and if you are

it have short in some board have to checked by some professional.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0answers

I have a Hitachi Plasma TV P50S601 red power on, but when I press power button the screen flash then shut down and the blue light blink three time then stop.Do you know the problem ?
Read full answer
Be the first to answer Apr 20, 2016 • Hitachi Televison & Video
1helpful
1answer

Hitachi tv turns on then gets bad picture than turns off blue light blinking
The name of the part is probably "buffer board" and there are two in your TV - upper buffer and lower buffer, also called SDR-U and SDR-L boards.

Those are the two most common sources of problems in P50S601 along with the Y sustain board (SD board in hitachi and Panasonic terminology), which sometimes gets damaged by the failed buffer board.

In the buffer boards market there are all kinds of offerrings. There are old buffers for around $130 for the pair and there are new buffers in the range $160-$200 for the pair.

In my opinion if the difference is barely $30-$40 one is better off going for the brand new ones.

Here's a link to our title for them, you can sure find others if you start from it:

http://www.coppelltvrepair.com/p/182/hitachi-nd60200-0048-and-nd60200-0049-replacement-set-of-buffer-boards

Hope this helps!

www.coppelltvrepair.com
Read full answer
Dec 15, 2012 • Hitachi Ultravision P50S601 50 in. Plasma...
0helpful
1answer

We have a Hitachi P50S601, Ser # V7L019070, plasma TV. Turned it on and the power indicator light goes from blue to a blinking red light (Stand By Mode). The TV is connected to DIRECTV and if you are fast...
it have short in some board have to checked by some professional.
Read full answer
Mar 02, 2012 • Hitachi Televison & Video
5helpful
2answers

My hitachi p50s601 turns on for 1 second and then goes completely blank and the blue light flashes 3 times repeatedly.what do i do?
3 Blinks means one of the buffer boards is bad. The way to test it is to unhooking one SDR board at a time, and see if half of your screen comes on properly. If the SDR-D board is bad the bottom half of the screen won't come on when you remove the board. Send it out for repair (less expensive then buying a replacement board) or search for a refurbished board. If your non technical provide this info to a service tech and ask for an estimate. Cost will be moderate. Hope this helps you. Jon
Read full answer
Oct 25, 2011 • Hitachi Ultravision P50S601 50 in. Plasma...
0helpful
1answer

Tv turns on for a few seconds then shuts off and the blue power light blinks.
Mine never turned on but the blue power light would blink.I disconnected the upper y buffer and got light on the bottom half of screen and the blinking stopped.I have the upper board on order and I think this will fix my problem.There is a blink code somewhere,just count how many blinks.Start pulling connectors from power supply and when it quits blinking you've found the one,could also be the power supply with bad cap.
Read full answer
Jul 14, 2011 • Hitachi Ultravision P50S601 50 in. Plasma...
1helpful
2answers

Need a schematic for model p50s601
This web page may help it has links telling you what to test. http://www.hometheatershack.com/forums/hitachi/30302-p50s601-blue-power-light-flashing-3-times.html like if your power light is flashing 3 times then it most likely is two caps in the power supply and one of the sdr boards.
Read full answer
Jan 08, 2011 • Hitachi Ultravision P50S601 50 in. Plasma...
1helpful
2answers

Blue light blinks three times
very common issue for these sets! p50h401 and p50s601 are almost the same.

for more info on this set please check out http://www.hometheatershack.com/forums/hitachi/38229-hitachi-p50h401-led-flashes-3-times.html
if will tell you how to trouble shoot this tv. these tv's are known for two caps in the power supply to go bad and they need replaced then you have to test the sdr buffer boards if they are bad you need replacement boards or you can send them off to be repaired.( Repairing the buffer boards is a lot less then replacing them ) the link for the repair guy is on the page. this guy also sells the repair on ebay but if you contact him directly i beleave the price is lower. just tell him you were send over by home theater shack.
Read full answer
Sep 19, 2010 • Hitachi Ultravision P50S601 50 in. Plasma...
0helpful
1answer

Hitachi Plasma P50S601 no picture sound OK
probably needs new scan drive board along with upper and lower buffer boards. it wont be cheap and its best to have a tv shop do it.
Read full answer
Aug 30, 2009 • Hitachi Ultravision P50S601 50 in. Plasma...
0helpful
2answers

Blue light blinking-
I would say you are lucky to get a pretty fair price, sounds like a convergence problem- if the tv is a projection wide screen. worth the investment Julio [email protected]
Read full answer
Jul 22, 2009 • Hitachi Ultravision P50S601 50 in. Plasma...
2helpful
2answers

No Picture or Sound, Blinking blue light
the bulb is blown, replace bulb prie 150.0 to 250.00 it is not a hard repaitr to do yourself.
Read full answer
Apr 17, 2009 • Hitachi Ultravision P50S601 50 in. Plasma...
Not finding what you are looking for?

View Most Popular

Ultravision P50S601 50 in. Plasma HDTV

  • Televison & Video

Related Question

I have a Hitachi Plasma TV P50S601 red power on, but when I press power button the screen flash then shut down and the blue light blink three time then stop.Do you know the problem ?

  • Hitachi Televison & Video

193 views

Ask a Question

Usually answered in minutes!

Popular Questions

Large Black Box Showing up in middle of screen.

Hitachi 50UX57B 50" Rear Projection...

Hitachi light engine

Hitachi 50V500 50 in. HD-Ready LCD...

Red & green shadowing on the right side of picture

Hitachi 60EX01B 60" Rear Projection...

Where can i find a manual for a hatachi 60ux54b tv

Hitachi Televison & Video

Hitachi TV screen adjustment

Hitachi 50UX57B 50" Rear Projection...

Check Out the Latest HD Televisions Report
Check Out the Latest HD Televisions Report

View all Fixya Reports

Top Hitachi Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...