Question about Mad Catz PS3 Bluetooth® Headset Wireless Headset

Red button in the center of controller wont turn on.

I went to play God Of War1 today and I played for like 7 minutes then the red light turned off I made sure the usb was still plugged into my PS2 and it was then I tried putting NEW batteries in that I just bought and that would not work I don't know what the problem and how to fix it someone please help.

2 Related Answers

Daniliuc Andrei

50 Answers

SOURCE: So i bought the Mad

Hi Matthew,

With those headsets that think is a known issue.
If nothing happens when you hold down the answer button then the battery must be out (or the headset is faulty).
If you tried to plug it into a USB on a PC to charge it, and the red light does not stay on then I'm afraid it became faulty.
All you can do now is to get back to the retailer who sold it to you and get a replacement for it, or if the retailer cannot help you consider getting back to MadCatz requesting a replacement if it's still within warranty.

Hope it helps.

Posted on Apr 29, 2011

Anonymous

713 Answers

SOURCE: bought mad catz wireless usb

Hello,
It can be deduced from your problem that the bluetooth headset you purchased is mal-functioning as a result of the fact that it has a factory default,since you havn't even used it for once before the problem occured.
The only solution is to take it back to the point of purchase to get a replacement,because if you try to fix it now you'll void the warranty that came with it.

Thanks and have a nice day.

Posted on Jun 29, 2011

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Hi, i have a ps3 system that stopped working.. i was playing this morning for about 1 hr or so, everything was fine untill it turned off by itself. i chechked all the conections everythings good , went to ...

well what how many gigs is it and some consoles have a low play rate so it would probabally need to cool down

Read full answer

Dec 06, 2010 • Sony Playstation 3 (PS3) Console

3helpful

2answers

Bose 321 series wont play region 1 dvd

To convert Bose 3-2-1 GS Series 2 DVD system to Multi-Region playback

1. Press the Right button on your remote control
2. Press the Up button on your remote control
3. Press the Shuffle button on your remote control
4. Press the Stop button on your remote control
5. Press the Mute button on your remote control
6. The disc tray should eject twice to confirm the region change
7. Press the Standby button on your remote control to power off your machine
8. After one minute, press the Standby button on your remote control to power on.

Done!

Read full answer

Nov 29, 2010 • Bose 3 2 1 GS Series II DVD Home...

0helpful

1answer

I haven't Played My Playstation In Awhile & I Just Went To Go Play It & I Pushed The Power Button & The Light Turned From Red To Green Then In 1 Second It Turned Back To Red Again..... What Do...

try unplugging AC cord from wall and wait 5 minutes before plugging in.
hope this helps :D

Read full answer

Jun 14, 2010 • Sony PlayStation 2 (PS2) Console

0helpful

1answer

Wont power up goes to flashing red light

they have videos on youtube to fix that

Read full answer

Apr 11, 2010 • Sony Playstation 3 (PS3) Console

0helpful

2answers

Shuts off randomly.

do red lights show up? if so look up red light errors ten ask about a fix for that specific error.

Read full answer

Nov 28, 2009 • Microsoft Xbox 360 Console

0helpful

1answer

My xbox controllers will not charge with the plug in kit. The light turns red, then either immediately green, or it starts to blink red-off-red-off.

I had the same problem. The Battery pack on mine was dead for a long time as i havent touched my Xbox 360 in a while. So
SOLUTION
Step 1. Plug the play and charge cord into the controller
Step 2. If Light turns green within a minute or so, Unplug the play and charge cord and go to Step 1 (Repeating this process until the light stays red on the play and charge cord (3-10 times))

Read full answer

Oct 08, 2009 • Microsoft Xbox 360 Controller

1helpful

2answers

Ps3 wont turn on using controller and power button...

try cycling the power on the back of the console
are the lights blinking on your controller when you press them?

Read full answer

Jul 11, 2009 • Sony Playstation 3 (PS3) Console

0helpful

2answers

Alot of red and double image

I had same problem. First went in tomenu and went to set up settings and went to convergence area. I then reset this back to default, which I later was told I should have not done so do not attempt this it will temporarily fix issue but problem will persisit.
I found a local tv repair man thru tvrepairguy.com or something like that as they are hard to find.
The issue turned out to be the convergence boards or circuits, He then went in to master control and rset the convergence settings for the main picture by lining up the red and blue lines on to a white cross on the screen until it is black and white with no red or blue protruding vertically or laterally. He then did this for 7 points around center picture moving the lines. He suggests you play with this for awhile in a position you would normally sit in and at proper eye level to give you the truest picture for alignment. The part cost 109 to replace with labor and service total was 331. The repairman was very nice and explained the issue should be fixed and we should get another 6 to 7 years out of television.
Hope this helps,

Read full answer

Dec 04, 2008 • Panasonic PT-53WX53 53" Rear Projection...

1helpful

2answers

Mitsubishi WT-42313 42 in. rear projection tv

I guess I have to pay money for a solution, which is not what this website says. The only answer I got was pay money and we'll tell you. Is that true/

Read full answer

Sep 16, 2008 • Mitsubishi WT-42313 42" Rear Projection...

0helpful

1answer