Belt What number belt do I need and how to change it

Question 1

0helpful

1answer

Why does my hoover belt keep snapping?

Hello! Your belt will need to be replaced about twice a year. If your belt is breaking within a couple uses of you changing it, you may not have the correct belt for your vacuum. Double check the owner's manual or Hoover.com to verify the belt number for your vacuum. Always replace the belt with a genuine Hoover belt. Hope this helped!

Aug 25, 2014 • Hoover Vacuums

0helpful

2answers

Need belt for Eureka vaccum The Boss model 5848 AV-2. Can you give me a belt number for what i nee. Thanks.

The belt part number for the Eureka 5848 AV-2 vacuum is 61120A.

Should you need part numbers for other pieces of the Eureka 5848 AV-2 vacuum, click on the following site, http://www.vacpartswarehouse.com/Eureka-5848-Lightspeed-Whirlwind-s/1959.htm

Mar 14, 2011 • Eureka 5849A Boss Bagless Upright Cyclonic...

0helpful

1answer

How do I replace the belt on my eurika vacuum it is a boss model.

Did you say that you have a Eureka? Also you need to know the model number because belt changing methods and belt sizes vary depending on the model. You can find the model number on the vacuum and can find the belt you need in the manual. Then you can get any Eureka belt here:

http://vacbelts.com/index.htm

Oct 28, 2009 • Emerson Vacuums

0helpful

2answers

Need to check , belt , donot where to check,on

Hello,
If you click on this link, it will take you to a website that has instructions with illustrations to show you how to change belt.
Hope this helps.

http://www.info-vacuum-cleaner.com/hoover-vac-belt.php

Aug 21, 2009 • Vacuums

0helpful

1answer

Pictures on how to change belt on a wildcat vaccum

http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=846664
Generic problem for all Vacuums
Pictures on how to change
Posted by dixieldavids on July 28, 2008
Pictures on how to change belt on a wildcat vacuum
Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Not knowing the brand name and model number for the vacuum but I can give you a generic way of changing the belt. You 1st need to remove the bottom plate by screws, levers or clips, then you can get @ the belt, if not then you should remove the top cover and then you can get @ the belt. 1st remove the belt from the brushroll and install the new belt on the pulley side of the brushroll and then use a belt puller or a screwdriver with a bend on the end and then stretch the belt onto the motor pulley and then track the belt in a straight line so that is running in a straight line. Replace the bottom plate and the belt change should be done. Please feel free to contact your local vacuum cleaner dealer in your area.
So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
Thanks, Don the Vac Man
Go Ahead. Use Us.

Jul 28, 2008 • Vacuums

0helpful

1answer

How to change belt on hoover turbo 4600

http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=841267
Generic problem for all Vacuums
How to change belt on
Posted by tbellme on July 27, 2008
How to change belt on Hoover Turbo 4600
Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Knowing the brand name and model number for the vacuum but I can give you a generic way of changing the belt. You 1st need to remove the bottom plate by screws, levers or clips, then you can get @ the belt, if not then you should remove the top cover and then you can get @ the belt. 1st remove the belt from the brushroll and install the new belt on the pulley side of the brushroll and then use a belt puller or a screwdriver with a bend on the end and then stretch the belt onto the motor pulley and then track the belt in a straight line so that is running in a straight line. Replace the bottom plate and the belt change should be done. Please feel free to contact your local vacuum cleaner dealer in your area.
So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
http://www.hoover.com Telephone
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. - 7 p.m. EST
Thanks, Don the Vac Man
Go Ahead. Use Us.

Jul 27, 2008 • Vacuums

1helpful

1answer

I can't change belt

http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=832643
Generic problem for all Vacuums
I can't change belt
Posted by jaw53t on July 25, 2008
I can't change belt
Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Not knowing the brand name and model number for the vacuum but I can give you a generic way of changing the belt. You 1st need to remove the bottom plate by screws, levers or clips, then you can get @ the belt, if not then you should remove the top cover and then you can get @ the belt. 1st remove the belt from the brushroll and install the new belt on the pulley side of the brushroll and then use a belt puller or a screwdriver with a bend on the end and then stretch the belt onto the motor pulley and then track the belt in a straight line so that is running in a straight line. Replace the bottom plate and the belt change should be done. Please feel free to contact your local vacuum cleaner dealer in your area.
So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

Jul 25, 2008 • Hoover U5753-900 WindTunnel Bagless...

0helpful

1answer

Instructions on changing a belt on an Elite Hoover Vacuum Cleaner Model # v5075-930 Serial # 089500053577

http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=825812
Generic problem for all Vacuums
Instructions on changing a belt
Posted by ed_maxwell on Jul 24, 2008
Instructions on changing a belt on an Elite Hoover Vacuum Cleaner Model # v5075-930 Serial # 089500053577
Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Knowing the brand name and model number for the vacuum but I can give you a generic way of changing the belt. You 1st need to remove the bottom plate by screws, levers or clips, then you can get @ the belt, if not then you should remove the top cover and then you can get @ the belt. 1st remove the belt from the brushroll and install the new belt on the pulley side of the brushroll and then use a belt puller or a screwdriver with a bend on the end and then stretch the belt onto the motor pulley and then track the belt in a straight line so that is running in a straight line. Replace the bottom plate and the belt change should be done. Please feel free to contact your local vacuum cleaner dealer in your area.
So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
http://www.hoover.com Telephone
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. - 7 p.m. EST
Thanks, Don the Vac Man
Go Ahead. Use Us.

Jul 24, 2008 • Vacuums

0helpful

1answer

Hi I have an electrolux "The Boss" hand held vaccum cleaner. I cannot find the instructions and am having problems changing the belt. It is model number Z57A. Product Number 900-250-006. It...

You need top lace belt on brush roller and re[-assemble by putting plastic cover on which is retained by 2 recessed philips screws.. Prize off triangular coverat fornt.behing that you should see the belt lying loose.You need to get a blunt object to twist and push belt ovet the motor shaft. You may get it on in wrong direction and if you do,loosen off belt and twist the other way.

Jul 12, 2008 • Electrolux Vacuums

0helpful

1answer

Change my belt on a fantom vacuum model number is f1420gf

http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=766591
Generic problem for all Vacuums
Change my belt on a
Posted by sylvester021 on Jul 10, 2008
Change my belt on a Fantom vacuum model number is f1420gf

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. The belt change on the Fantom is to remove the bottom plate by undoing the screws, clips or levers, then cut off the old belt, remove the brushroll on the pulley side and place the new belt on the pulley side and replace the brushroll. Then use a belt puller or screwdriver with a hook on the end and then stretch the belt onto the motor pulley and then track the belt in a straight line. The replace the bottom plate and you should be fine. The recommended belt change on a vacuum with a flat belt is every 4 to 6 months for the best cleaning and always use the genuine belts for the Fantom. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
These are the other brands that use the same tech support line
Shark / Euro-Pro / Infinity / Bravetti / and Fantom
http://www.fantom.com/ Customer Tech Support 1-800-798-7398
Hours are Monday thru Saturday from 9:00 AM to 6:00 PM (EST)
Thanks, Don the Vac Man
Go Ahead. Use Us.

Jul 10, 2008 • Vacuums

Question 2

williamsa43

Expert 164 Answers
Posted on Apr 19, 2014

williamsa43

Expert

Joined: Apr 19, 2010

Answers

164

Questions

1

Helped

37184

Points

457

Un plug unit, turn unit over,remove screws on panel covering the belt. ,first start belt on large pulley and then start it on small pulley turn brush by hand to wind the belt on. Google the model number or go to Wal-M and look in their "bags and Belt" book located next to the Vacuum cleaners.

Answer 2

Peter

Expert 264 Answers
Posted on Apr 19, 2014

Peter

Expert

Joined: Mar 20, 2014

Answers

264

Questions

1

Helped

147545

Points

585

Hi I'm Peter, Belt number for long life belt is 61120A. Here is a link to all the parts breakdown for your vacuum.

Related Topics:

Trustworthy Expert Solutions

Belt What number belt do I need and how to change it

2 Answers

williamsa43

Peter

Add Your Answer

Attachments: Added items

Related Questions:

Why does my hoover belt keep snapping?

Need belt for Eureka vaccum The Boss model 5848 AV-2. Can you give me a belt number for what i nee. Thanks.

How do I replace the belt on my eurika vacuum it is a boss model.

Need to check , belt , donot where to check,on

Pictures on how to change belt on a wildcat vaccum

How to change belt on hoover turbo 4600

I can't change belt

Instructions on changing a belt on an Elite Hoover Vacuum Cleaner Model # v5075-930 Serial # 089500053577

Hi I have an electrolux "The Boss" hand held vaccum cleaner. I cannot find the instructions and am having problems changing the belt. It is model number Z57A. Product Number 900-250-006. It...

Change my belt on a fantom vacuum model number is f1420gf

Not finding what you are looking for?

Whirlwind LiteSpeed 5843 Upright Vacuum

Why does my hoover belt keep snapping?

Ask a Question

Check out the Latest Vacuums Report

Top Eureka Vacuums Experts

Mike Cairns

Jo Ri

Alexander

Are you an Eureka Vacuum Expert? Answer questions, earn points and help others

Manuals & User Guides

. Whirlwind LiteSpeed 5843 Upright...

Related Topics:

Trustworthy Expert Solutions

Belt What number belt do I need and how to change it

2 Answers

williamsa43

Peter

Add Your Answer

Attachments: Added items

Related Questions:

Why does my hoover belt keep snapping?

Need belt for Eureka vaccum The Boss model 5848 AV-2. Can you give me a belt number for what i nee. Thanks.

How do I replace the belt on my eurika vacuum it is a boss model.

Need to check , belt , donot where to check,on

Pictures on how to change belt on a wildcat vaccum

How to change belt on hoover turbo 4600

I can't change belt

Instructions on changing a belt on an Elite Hoover Vacuum Cleaner Model # v5075-930 Serial # 089500053577

Hi I have an electrolux "The Boss" hand held vaccum cleaner. I cannot find the instructions and am having problems changing the belt. It is model number Z57A. Product Number 900-250-006. It...

Change my belt on a fantom vacuum model number is f1420gf

Not finding what you are looking for?

Whirlwind LiteSpeed 5843 Upright Vacuum

Why does my hoover belt keep snapping?

Related Topics

Ask a Question

Popular Questions

Eureka Boss vacuum just quit

In Carpet setting, the vacuum brush does not spin

Eureka vacuum blowing dust into the air

How to change belt on Eureka maxima 4700a

The suction on my eureka optima stopped working

Check out the Latest Vacuums Report

Top Eureka Vacuums Experts

Mike Cairns

Jo Ri

Alexander

Are you an Eureka Vacuum Expert? Answer questions, earn points and help others

Manuals & User Guides

. Whirlwind LiteSpeed 5843 Upright...