Question about Siemens Gigaset 8825 Cordless Phone
My Siemens Gigaset A260 cordless phone is stuck in the registration phase, meaning when I first open it, and put it in the base, the phone display has the word "base" flashing.
Is there a solution for this issue?
Can I reset it anyhow?
Have you pulled the battery once?
Posted on Aug 17, 2010
We've tried to register the Siemens A260 handset to the base but it continues to flash "Base".. and does not work.
Posted on Mar 16, 2010
Tips for a great answer:
Please dont forget to vote this answer was helpful and accept it.
1. On the base station: press and hold the registration/paging key for min. 3 sec.
2. On the handset: within 60 sec. of pressing the registration/paging key;
Select MENU then Settings then OK then Handset then OK - Register HS then OK -
Enter the system PIN of the base station (the default PIN is 0000). Then press OK.
Registering now flashes in the display.
Registration takes approx. 1 minute to complete.
Thanks for using FixYa. Please do leave a vote for the help.
Usually answered in minutes!