SOURCE: Hi I have 5 Juki DDL-8700-7 machines and I need to
So many machines you would be best at aution as one complete lot.
SOURCE: I have an error code
hi there 2 - Check whether 110V/220V changeover switch is improperly set. 3 - if 400 volt is input means POWER P.C.B is broken maybe repair or need to change. best regards ashraf abozid
may i know control model ? any way E811 means :
1- over voltage when voltage higher than guaranteed one is inputted ( please check wheter the applied power voltage is higher than te rated voltag ( plus ) 10% or more.
SOURCE: how do you thread a Juki DDL-8700
Hi Vikki,
Here is an image of the threading up for your model Juki.
You can down load a manual for your Juki from their website, its a bit tricky to find so I'll paste the link for you.
http://www.juki.co.jp/industrial_j/download_j/manual_j/DDL8700/menu/pdf/instruction_eg.pdf
just wait a bit for the file to build to your screen because its a large file.
I hope this helps you get using your machine.
309 views
Usually answered in minutes!
×