How to get the wap password

maybe the password of router is not match in your phone try to config again your router and change your password setting to wap

The best way is to call your carrier and get them sent to your phone automatically. To enter them manually:
T-Mobile Browser/Java Settings:

Connection name: T-Zones
Gateway IP address: 216.155.165.050
Secondary IP address: Blank
APN name: wap.voicestream.com
Data bearer: GPRS
Profile name: GPRS
Username: Blank
Bearer: Data
Home page: http://wap.myvoicestream.com

T-Mobile MMS Settings:

WAP Gateway IP Address: 216.155.165.050
APN Name: wap.voicestream.com
Homepage or MMSC URL: Messaging Server: http://mms.msg.eng.t-mobile.com/mms/wapenc
Data Mode: Connection Oriented

AT&T Browser/Java Settings:

Connection name: Internet GPRS
Data bearer: GPRS
Access point name: wap.cingular
User name:
Prompt password: No
Password:
Authentication: Normal or Secure
Gateway IP address: 66.209.11.61
Homepage: http://device.home
Connection security: Off
Session mode: Permanent

AT&T MMS settings:

Connection name: Multimedia
Data bearer: GPRS
Access point name: wap.cingular
User name:
Prompt password: No
Password:
Authentication: Normal or Secure
Gateway IP: 66.209.11.61
Homepage or MMSC URL: http://mmsc.cingular.com
Connection Security: Off
Session Mode: Permanent

In your router WEP or WAP security enabled so it ask for password.
For that follow below.
connect your router to computer with ethernet cable.
Then you can access it with following link.
for belkin routers http://192.168.15.1
for other routers
http://192.168.1.1
or
http://192.168.0.1


type user as "admin" and password as "admin" or blank or "password"
Then you can see configuration page of router.
Then click wifi or wireless settings There is WEP or WAP security enable note down that code if it is in * or # format then add new code then save settings and restart router.
That code is your password to connect wifi.
Let me know if you need further assistance.

I suspect the device that is asking for a password will be your wireless router. Normally, the password, or key, is printed on a label on the side or bottom of the router.

First connect your router to computer with ethernet cable.
Then access it with following link.
http://192.168.1.1
or
http://192.168.0.1
type user as "admin" and password as "admin" or blank or "password"
then you can see configuration page of router settings.
Go to wi fi or wireless menu then find WEP or WAP security code key it is your password to connect wi fi network.If it is in * or # format then add new code so you can connect it with new code.
then save settings and restart router.
Then add that code key in mobile for connect wi fi .
Let me know if you need more assistance.
Thanks.

First connect your router to computer with ehtenret cable.
Then access it with following link.
http://192.168.1.1
or
http://192.168.0.1
type user name as "admin" and password as "admin" or blank or "password"

then go to wi fi security then check WEP or WAP key you have to set new key because it is in * or # format then save settings and restart router.
WEP or WAP key it is your password to connect wi fi internet ,
Let me know if you need more assistanse.

Thanks.

First connect your router to computer with ehtenret cable.
Then access it with following link.
http://192.168.1.1
or
http://192.168.0.1
type user name as "admin" and password as "admin" or blank or "password"

then go to wi fi security then check WEP or WAP key you have to set new key because it is in * or # format then save settings and restart router.
WEP or WAP key it is your password to connect wi fi internet ,
Let me know if you need more assistanse.

Thanks.

First connect your router to computer with ehtenret cable.
Then access it with following link.
http://192.168.1.1
or
http://192.168.0.1
type user name as "admin" and password as "admin" or blank or "password"

then go to wi fi security then check WEP or WAP key you have to set new key because it is in * or # format then save settings and restart router.
WEP or WAP key it is your password to connect wi fi internet ,
Let me know if you need more assistanse.

Thanks.

First connect your router to computer with ehtenret cable.
Then access it with following link.
http://192.168.1.1
or
http://192.168.0.1
type user name as "admin" and password as "admin" or blank or "password"

then go to wi fi security then check WEP or WAP key you have to set new key because it is in * or # format then save settings and restart router.
WEP or WAP key it is your password to connect wi fi internet ,
Let me know if you need more assistanse.

Thanks.

If your router configure as WEP or WAP it ask for password to connect for security.
For that connect your router to computer with ethernent cable to computer then access it with following link.
http://192.168.1.1
or
http://192.168.0.1
For belkin router default link is http://192.168.15.2

type user name as "admin" and password a s"admin" or blank or 'password"

then check in wi fi security if it is cinfigured as WEp or WAP you find its password in that but it is in * or # format so set new password so you can remember it.
then save settings and restart .
But if your router has no any security then you not need password to connect it.