Question about Briggs & Stratton Garden
15.5hp intek engine cylinder head torque setting
Posted by Anonymous on
Search Briggs on the Web, You can order Manuals there. The torque is in in. pounds. Need more info ! A just get them tight and all about the same will work, stagger the bolts in the Head when tightening ( one bolt, one side then the other until done.) Then check them all.
Posted on Sep 15, 2009
con rod bolt torques are 150 in/lb or 12.4 ft/ lb
cyl head bolt torque is 220 in/lb or 18.5 ft/lb
here is website for parts and manual
i would torque them in this sequence
start from bolt centre top , then bolt centre bottom, then bolt left upper , then bolt btm right, then bolt bottom left , then bolt upper right , then bolt centre left
should be 7 bolts 5/16 x unc
check out website its good so is www.partstree.com
Posted on Aug 17, 2010
Tips for a great answer:
Jun 01, 2016 | Cars & Trucks
Aug 17, 2015 | Kia Cars & Trucks
Mar 21, 2015 | Garden
Aug 04, 2014 | 2007 Mitsubishi Outlander 2.4
Nov 07, 2012 | Nissan Cars & Trucks
Oct 15, 2012 | Toyota Cars & Trucks
1. Set No. 1 cylinder at 1/4" (6.4mm) past TDC, compression
a. Adjust valves and check, Fig. 17.
Valve Clearance (cold) IN and EX .005" (0.13 mm)
b. Torque adjusting screws and jam nuts to 60 in. lbs.
2. Set No. 2 cylinder at TDC, compression stroke.
a. Repeat for No. 2 cylinder.
Thanks for choosing FixYa,
Aug 24, 2011 | Craftsman Garden
Jun 11, 2011 | 1997 BMW 318
Nov 24, 2009 | 2001 Kia Sportage
Feb 07, 2009 | 1994 Oldsmobile Cutlass Supreme
Nov 09, 2018 | Briggs & Stratton Power Products 1539...
864 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: