Getting J00 on my machine what does this mean?

I find it is always best to contact customer service, I got my printers fixed free long after warranty expired, all done online and/or by phone.

It usually means the paper did not feed when asked. Check your exit switch and the registration switch in the paper path below the drum. If a jam was removed incorrectly one of those may be off its pivot and the machine thinks there's a paper there. Or the sensor itself is bad.

J00 is an unidentified jam. Means that a paper jammed in the machine and the user switched the machine off and then on again. So the machine lost the ability to inform the user where the jam is. As a result the user has to find out where the jammed paper or piece of paper is.

J00 means that the machine did not pick. remove the cassette and the put back and press start again

J00: means the paper is jammed in the paper pickup step, remove the cassette and pull the paper softly. and reinstall the cassette again. the message will be cleared.

Means that it never fed the paper from the cassette.Sugest that you ensure that the paperr is loaded correctly and that the cassette is correctly adjusted.May need the feed rollers cleaned.

J00 is flashing on my Kyocera KM-1500 copier, i checked but can't see any paper jam

Code J00 is paper tractions error, either one of the traction wheel or one of the sensor is stuck or defective, often you need to take apart the printer to fix this.

If this is the model that I think it is this one stumped me and come to find out it was related to toner. Is the toner bottle full or is the waste toner bottle full. It seems and agian this may not be the model, you have to put in new toner and the machine will run untill it tones up. During that time the machine will not work...Again i have seen this but do not know if this is the correct model, Good luck..

jam 0 means there is one of your switches not working good, it shows that there is jamming but there is no paper, so u have to check which switch is not in right place and fix it.

I’m happy to help further over the phone at https://www.6ya.com/expert/mustafa_06f84c65ab5cc745