Question about Life Fitness Exercise & Fitness
Posted by Anonymous on
SOURCE: Replace Switch error message
It was the emergency tag that you attached to yourself when you run (in case you fall over - the belt then stops etc). i had not connected it properly
Posted on Jan 27, 2009
SOURCE: 9100 life fitness treadmill
Sounds like you need a new lower board replacement. You can get that for that treadmill by call lifefitness or sportsmith.com Please rate me good
I’m happy to help further over the phone at https://www.6ya.com/expert/howard_079189dd4959a511
Posted on May 01, 2009
Error 1 - Start up error. This is caused because the belt was commanded to move and the opto (speed sensor on the motor) has not seen any movement or the belts movement was interrupted prior to it reaching its commanded speed. To fix Verify opto operation in Diagnostics, Motor Test
Mode, Section 2. Verify DC voltage at connector P6 pins 1 and 2. Verify that LED 4 on the Motor Controller flashes as the motor moves. Let me know if you need any more help. Fitness Fix-It
Posted on Mar 24, 2010
This error shows up if motor controller detects a failed part. This isn’t a reset-able error. Treadmill will not allow workouts until serviced.
Main motor wires/leads could be disconnected at the start of a workout. If the motor is properly connected and in working condition then the drive transistor could have failed. Check Motor Controller.
Posted on May 07, 2010
Tips for a great answer:
Nov 10, 2016 | Life Fitness Exercise & Fitness
Apr 24, 2016 | Life Fitness F3 Folding Treadmill with...
Dec 22, 2012 | Life Fitness F3 Basic FoldingTreadmill
Jul 24, 2010 | Life Fitness F3 Folding Treadmill with...
Jun 27, 2010 | Life Fitness F3 Folding Treadmill with...
May 03, 2010 | Life Fitness F3 Folding Treadmill with...
Mar 18, 2010 | Life Fitness F3 Folding Treadmill with...
Nov 17, 2009 | Life Fitness F3 Folding Treadmill with...
Oct 31, 2019 | Life Fitness 95ti Treadmill
23 people viewed this question
Usually answered in minutes!