The screen is blank and the radio changes stations also the touchscreen does not work
SOURCE: Boss Audio System Model #BV8966B
Hi,
Some DVD players cant read some DVD s and then it shows either "loading" or " no disc"..
it generally happens when you want to play "A copied DVD/CD " taken from somewhere else..
Some DVD players are fine at the beginning but after some time later,it begins to have some problems as you have..This is mainly due to LASER eye problems..
Just in case,quick remedy ,pls Clean your DVD player's LASER lens .. A clean DVD player Lens ensures that
your DVD disc would be read properly. Unfortunately, your DVD player's
Lens accumulate as much dust and lint as the other parts of the DVD
player. There are many available DVD lens cleaner kits
that you can purchase and use to clean your DVD player.
YOUR DVD disc itself should be clean and finger prints free as well....
Here are three suggested DVD Lens Cleaner that should do the job of cleaning your DVD Player's lens.
Memorex Laser Lens Cleaner for DVD
- This cleaner contains six soft brushes that gently remove dust, dirt
and other airborne contaminants from your DVD player's lens. (Price:
$6.09)
Maxell DVD-LC DVD Lens Cleaner
- This DVD Lens cleaner features the "Thunderon Brush System" and
include tests for audio performance including Dolby 5.1 surround sound.
It also features an interactive on-screen instructions in 8 languages
including system set-up. (Price: $10.81)
Allsop 23321 Carbon-Edge DVD and CD-Drive Cleaner
- This DVD Lens Cleaner features an 8 brush carbon-system with carbon
edge that removes static build-up from your DVD Players. It prevents
skipping and also improves the sound and picture output of your DVD
Player. ($13.11)
if this remedy does not help and if your set has
still under warranty ,consult to service they may replace the LASER Reader
EYE...most of the time Laser Eye malfunctions and does this..
if it is not under warranty ,never ,never have someone repaired it..go buy a new one,It will be cheaper.. ...
Hope this helps! Take care and please Remember to rate/vote and give me
4 Thumbs Up for me to continue for Helping out the Community :)
Thanks
SOURCE: Do i need a new laser or just clean the laser?
You can try cleaning the laser lens first. The lens can be cleaned with alcohol and qtips. If cleaning the lens doesn't work, then you may have a bad laser.
There is a radio option to recalibrate your touch screen. Please press the following three hard keys simultaneously RADIO/MEDIA, SEEK UP, NAV (AUDIO on REN). Once you begin to recalibrate the touch screen you must finish. Audio confirmation prompts are provided for each of the three points of calibration, one beep for the first, two for the second and three for the third. The calibration needs to be precise as possible and a PDA stylus would be recommended. The MyGIG radio requires the user to repress each calibration point to confirm the calibration process. A green crosshair indicates proper calibration.You must not start with the "+" but with the "+1", then goto "+2" and last to "+". Repeat this until all crosses are green and exit with pushing the menue or any other key. Done
78 views
Usually answered in minutes!
×