Access http 192 168 116

https://www.google.com/url?sa=t&source=web&rct=j&url=http://www.canon.ca/support_images/KB_images/PIXMA_iP7220/iP7220_Router_change.pdf&ved=0ahUKEwjtxrqAlbnTAhVM64MKHa1VBIAQFggyMAI&usg=AFQjCNEEXP8O72MJh4FA23jFT9UNQOxWGg&sig2=xlzOVwLKere6SYvCOvky6A

hi, i was unable to attach the manual (pdf file) you can download a user manual from the following site.http://support-in.canon-asia.com/?business

When you share the printer that is connected to your computer for other computers to use this printer, your computer MUST be left on at all times for the other computers to print to this printer.
The reason is, your computer acts as a print server, it collects the print data from the other computers and sends it to the printer.

Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank or "1234" Then you can see configuration page of router. If you are still not able to access then press RESET button for 10 seconds it is in back side of router then all settings defaults then you can access it with above ip and user name and password.

Let me know if you need further assistance. Thanks for using FixYa.

Hi.

To temporarily delete the print jobs in the cue do the following:

Disconnect printer USB.
Restart printer.
Restart computer.
Access printer cue with printer not connected (get there from control panel)
Clear printer cue.
Connect the printer back.

If the printer cue gets stuck too often, and always with different documents, try reinstalling the printer software.

Regards.

Ginko.

You may find this page useful (you also need an Access Point, but I assume you have one and it's configured correctly - don't you?)

http://www.derekunderwood.com/uncategorized/go-wireless-from-mac-to-canon-pixma-mp460/

Let me know.

Turn the printer off.
Turn your computer off.
Check the "data" cable at both ends (printer & computer).

Turn the computer on, and let it fully load Windows.
Turn the printer on.
Try to access the printer.

Steps to fix your issue

1. install printer driver on one computer
2. Make sure both computers are connected in same network by ethernet cable or wireless connection.
3. share the printer on 1st computer
4. access the shared printer from 2nd computer through network

This way your can access one printer from 2 computers. This setup work only when the 1st computer is turned on because HP leaser jet don't have the capability to work as network printer as they cannot acquire IP address.

If u need further information on how to configure 2 computer please refer below link
http://www.ajcsoft.com/connect_computers_together.php

For information regarding how to share printer on windows XP refer below link
http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

You can download the software for this printer from this link and then just install it so you can use the printer again http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=304432&lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=304430

you could try to uninstall the printer driver, and reinstall it, but first try a different printer cable