Software for V3 Racing Wheel

Can you use a v3 steering wheel on PS4?

Game Racing Wheel, PXN-V3II 180° Competition Racing Steering Wheel with Universal USB Port and with Pedal, Suitable for PC, PS3, PS4, Xbox One, Nintendo Switch.
https://www.google.com/search?q=V3+Interact+steering+wheel+and+pedals+on+ps4

..

Hi,
You can download from below website
http://www.driverfiles.net/Game-Devices/Interact/sv-283/download/page,sh,1056,181,24,.html
Thank You

You may have to program them,
Have they ever worked?

you can get it repaired , trying it yourself wont work well.

I dont have a user manual but i have the same wheel.INTERACT NEVER UP GRADED THE SOFTWARE FOR THIS WHEEL IT ONLY SUPPORTS WIN 95 98.I HAVE THE SOFTWARE AKA DEVICE DRIVERS FOR THIS WHEEL.I BOUGHT MINE AT A GARAGE SALE AND HAD TO FIGURE IT OUT MYSELF.EMAIL ME AT [email protected] and ill give you whatever you need-DBELL

It seems that you have a huge problem. This wheel only connects to a 15 pin game port, newer computers do not have the game port. You have to buy a 15 pin to USB converter, about $30.

And with no pedals?

v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 Here are all of the instructions enjoy.

To adjust the V3 Racing Wheel 2's sensitivity follow the instructions below. ( 3 preset sensitivity selections )

1. Press and hold the SET button for about 1 second to enter the "FUNCTION SETUP MODE", the MODE LED indicator will start blinking and two "beeps" will be heard.
2. Press the direction on the digital/analog directional pad and SELECT button that corresponds to the setting you desire. Directional pad UP and SELECT will give you high sensitivity. Directional pad LEFT/RIGHT and SELECT will give you medium sensitivity. Directional pad DOWN and SELECT will give you low sensitivity.
3. After selecting one of the above sensitivity options you will hear 2 "beeps" letting you know that the wheel has been programmed. For Customizable Sensitivity follow the directions below.

1. Press and hold the SET button for about 1 second to enter the "FUNCTION SETUP MODE", the MODE LED indicator will start blinking and two "beeps" will be heard.
2. Rotate (either left or right with the wheel ) and then hold the wheel to the specific angle desired.
3. Press the SET button again, two "beeps" will sound to indicate the completion of the setting

To reset the the V3 Racing Wheel 2 to it's factory default settings press and hold START, L1 and L2 buttons in until you here two "beeps".
To change between Digital and Analog modes follow the directions below.

1. Press and hold the SET button for about 1 second to enter the "FUNCTION SETUP MODE", the MODE LED indicator will start blinking and two "beeps" will be heard.

2. Press the SQUARE and SELECT buttons to set the wheel to DIGITAL, or the O and SELECT buttons for ANALOG. Two beeps will sound and the MODE LED will stop blinking letting you know that the mode has been selected.
By default GRAN TURISMO 3 A-SPEC uses the X and Square button for gas and brake. To reassign these functions to the pedals on your racing wheel:

1. Go to the options menu in Gran Turismo.
2. Select key configuration. (The picture of the Game Pad.)
3. Scroll down to Acceleration
4. Press Right on the D-pad (11x) until Analog Up is selected for the Right Analog Stick
5. Now go down to Brakes
6. Press Right on the D-pad (10x) until Analog Down is selected for the Right Analog Stick.
7. Press the X Button to confirm your changes and then press the Triangle button to return to the main menu
8. The gas and brake functions for the game will now be set to pedals on your wheel.

I have the same Interact V3 Wheel and with Win XP I can't use the drivers. Just configure it as a standard 2-axes 4-button wheel. It works great

Hi there 78 Racer, Press SET button the LED light will start to blink and beep once. Press the square button on the right hand side of the wheel. This will set it to Digital and pressing the circle will change it back to Analogu. The LED will stop blinking and a double beep sound indicates it's been set - that's it

If it was named with Vista it is obviously made for it!