Question about Mitsubishi WD-73C9 73" DLP TV

1 Answer

Mitsubishi wd-73c9 73" dlp tv

I have tried resetting the tv...the screen does not work, I can hear the fan come on but there's no picture...

Posted by Anonymous on

Ad

1 Answer

zinda

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 41 Answers

Here's what the Manual says about light codes for this TV. See Picture of actual page from manual.
mitsubishi wd-73c9 73

Posted on Aug 05, 2014

Ad

5 Related Answers

premtech

William Rayburn

  • 934 Answers

SOURCE: mitsubishi wd-62825 dlp

The WD62825 has a Digital Module located on the left side of the chassis looking at it from the rear of the set. It's housed in a metal box that can slide out of its holder after removing the trim screws.
The module has its own power supply board and there are a group of 16v/1000uf caps on that board which commonly fail causing the constant flashing standby light. Further back on the module is a small board about the size of a matchbook called the E2P module. Its SMT (Surface Mount Technology) caps also commonly fail which can cause the same symptoms. Techs can tell whether the E2P has failed by simply removing it, hooking the DM back up and trying to power the set. If it powers on the picture won't be much good - but at least you can tell what's keeping it down...
Back to the caps on the pwr board. If they've failed they usually will buldge visibly on top. And ESR is almost not necessary. In any event that's the nuts and bolts on this model.
Is it a job for a layman? Yes and no - you might strongly consider a tech if you don't feel comfortable removing all the connections that the DM has with the signal board. There are about six - multi-pin - wired connections to unplug and then sliding the DM out of the unit and carefully removing the screws and latching to take the DM top cover off...
Hope this helps.
Bill

Posted on Nov 10, 2007

Ad
ctf1800

Cary Farah

  • 4402 Answers

SOURCE: mitsubishi dlp does not get picture

the plug the connects underneath is not connecting right you have to get at the plug and seat it correctly

Posted on Dec 08, 2007

Anonymous

  • 192 Answers

SOURCE: electrical chasis cooling fan for Mitsubishi wd 52525

There are several Parts Houses that carry this part. The one I think that is the easiest to deal with is Andrews.

The URL is:

https://dealer.andrewselectronics.com

Can't find it there, reply to this post and I will respond.

Posted on Dec 15, 2007

rulds2008

Grand Canyon Tech

  • 3866 Answers

SOURCE: cannot turn tv on

Check power supplly make sure its not the fault in wht this will not turn on.

Unplug tv from wall wait 30 secounds and plug back in.

If that does not work you will need to have someone look at the powersupply.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Posted on Jul 01, 2009

Anonymous

  • 1 Answer

SOURCE: bugs are inside tv seen on inside of screen, how

How do I remove the screen to remove bugs?

Posted on May 25, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mitsubishi WD 82737 Replaced bulb has about 10 hrs on it then one day the TV just quit working and would not display a picture.


What do the indicator lights on the tv do?

Did you try a reset or unplug the power cord of the YV then try again?

Apr 18, 2014 | Mitsubishi WD-82737 82" DLP TV

1 Answer

I turn on my Mitsubishi WD-73833 TV and it turns itself off


Lessing of brightness on a DLP set is a sign of imminent bulb failure.

A new bulb is in order.

Nov 23, 2013 | Mitsubishi WD-73833 73" HDTV

1 Answer

Mitusbishi dlp tv shut off


hi when you replace the lamps, the lamp counter needs to be reset,thanks

shaun

Jun 28, 2017 | Mitsubishi WD-73737 73 in. HD-Ready TV

1 Answer

No picture just sound


GO SETTING TAB AND FIND OPTION SET DEFAULT MANUFACTURING SETTING AND TRY

May 18, 2012 | Sony KV-35S42 35" TV

1 Answer

My Misubishi WD-52631 DLP TV is off sudenly. I turn it on again, but no picture, no sound, nothing happened. I reset it, nothing happends. the green power light blinks for a while, then shut off itself....


Tv LED "LAMP" light indication is blinking?And ur tv projection lamp inside ur tv been used like 1 1/2 or 2 years.Yes.The tv projection lamp require changing,tv projection lamp life are ended.

Apr 19, 2011 | Mitsubishi WD-52631 52" Projection HDTV

1 Answer

How do you do a convergence on the wd73286?


Hi,
Mitsubishi WD-73286 is DLP tv that does not have any convergence circuit inside.
Convergence is required in old model rear projection tv that has three basic colors picture tubes to generate color picture that projected on front screen of tv.
DLP tv has light engine to generate picture, it is similar to multimedia projector that throws its picture on wall.
Hope this info will help.
Thanks.

Mar 05, 2011 | Mitsubishi WD-73827 73" HDTV DLP TV

Not finding what you are looking for?
Mitsubishi WD-73C9 73" DLP TV Logo

315 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1258 Answers

The Knight
The Knight

Level 3 Expert

76416 Answers

Todd Hill
Todd Hill

Level 2 Expert

433 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...