Calibrate the diplay
The Display calibration can be opened as follows:
- turn off the sewing-/embroidery computer
- touch the two needle positioning buttons on the front panel and keep them pressed
- turn on the sewing-/embroidery computer and release the buttons as soon as the Display appears
- touch the calibration icon
- touch the center of the cross using the touch pen
-- the cross moves to the next position
- repeat this until all three positions shown are calibrated
-- the Display is closed
-- the adjustment is saved
This Replacement LCD Touchscreen is suitable for your Bernina Artista 180
Bernina Artista 180 Replacement LCD Touchscreen
771 views
Usually answered in minutes!
Only sometimes it recognizes the touch, but only in the middle of the screen and almost never on the exact point where you touch it.
×