I have a concern using my blue-tooth, i can beam data to another mobile but while receiving its doesn't initiate or i don't receive. mobiles can find me but cannot send it.........m afraid if i have to claim a replacement set
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The following procedure is dependent to the phone in use! However it is mainly for Motorola brand but it works with many others too! 1. Turn on your mobile phones bluetooth function and go to search for new devices menu. 2. On the headset, From turned off state, Try holding down the power button for at least 5 seconds. - The light should stay constantly on (or in other brands flashining very fast) which means the headset is in receiving/searching state! 3. search in your mobile phone for blue tooth devices(the phone and headset shouldn't be more than 5 meters away from each other ) 4. When you find your blue tooth headset, chose it and hit "connect" or "pair" with the device! 5. you will be asked for a pin, put in "0000" and ok!
now your headset should be paired with your phone (the light flashes slowly) and will be ready to receive calls!
try an antivirus called net protector . load net protector on your main pc, use a cable to connect your mobile to pc using a compatible software for data transfer.
mobile will get detected in the antivirus software,SCAN YOUR MOBILE may be u are lucky to get blue tooth woking , if the file has come through blue tooth netwoking , pushed by some one when blue tooth was on some time. OTHER WISE do a factory reset and save all data first. if this too fails then the blue tooth hardware/software has to be rectified.
Blue tooth data transmission is slower compared to when done through a data cable.If the blue tooth devices are at fringe distances then there is every chance of a delay.Try keeping the devices as near as possible say within a meter or two.In such a situation both transmission and receiving is slower.