Office Equipment & Supplies Logo

Related Topics:

A
Anonymous Posted on Apr 12, 2014
Be the first to answer

Error code 486 - Lanier Office Equipment & Supplies

Answer This Question

1 Related Answer

Joed911

JDTec

  • 4338 Answers
  • Posted on Oct 04, 2008

SOURCE: Service Code Error 486

Please contact your local service representative or original point of purchase for help.
The Service Call indicator looking like a spanner or wrench: char_ric20.gif shows that an error requiring inspection by service representative has occurred in the device.
If the problem is a sensor malfunction, you may be able to solve it and turn the indicator off using one of the following methods.

  • Turn the main power of the device off and on again.
  • If some parts or supplies were replaced recently, try removing them, replacing them again, and then turning the main power of the device on off and on. (If the device is interpreting imperfect parts detection as an error.)
  • The device might be interpreting extreme changes in temperature as an error. Turn off the main power switch, wait for a few minutes to cool it off, and then turn it on.
    Note:
    • If a fax is being sent or received, or printer data is being received, turning the main power of the device off may result in data loss. Ensure that the device is not being used for faxing or printing before you try turning the main power of the device off.
Note that "main power" means the actual, physical power switch.

You may find answers here:
http://www.ricoh.co.uk/KBase/KBLink.cfm?ProductUID=2496

Please remember to rate all users who assist you for free :)


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

6ya.com

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0answers

Modal mw40cj Imei 35**********486 Rck code Please send me rck code
Read full answer
Be the first to answer Mar 10, 2019 • Cell Phones
1helpful
1answer

Key STuck Error
The key pad is not functioning properly thus this error is flashed you will need to replace key pad. Since I don't know where you are then the place to get the part is from precor directly the will ask Model & Serial #s
WORLD HEADQUARTERS20031 142nd Avenue NE
P.O. Box 7202
Woodinville, WA 98072-4002
T: 425-486-9292
T: 800-786-8404
www.precor.com
Read full answer
Jun 30, 2010 • Precor C954i Experience Treadmill
1helpful
1answer

What is base 6 of 486
for converting 486 to the base 10 to base 6 dived 486 by 6 and note the quotients and remainder.


486/6 = quotient = 81 remainder = 0.now divide quotient by 6 and note quotient and remainder.

81/6 = quotient 13 remainder= 3

13/6 = quotient 2 remainder = 1 .

2/6 = quotient 0 remainder= 2.


Hence reading remainder from below we get 2130.



So 486 tot he base 10 is equivalent to 2130 to the base 6.

Thank you.
Read full answer
Jun 25, 2010 • Mathsoft Solving and Optimization...
1helpful
1answer

486 Sprayer, lost instructions, sprayer lable washed off
See if this helps:
http://www.gotosprayer.com/sprayers/hose-end-sprayers/gilmour-dial-a-mix-hose-end-486
Read full answer
May 24, 2010 • Gilmour 486 Sprayer Dial A Spray
1helpful
1answer

My handy tone-486 box keeps flashing red every 3 seconds and I have no dial tone. My internet works and I have power and a working phone line to the box. Help.
Lifted this straight from the manual:

Button flashes every 4 seconds
(if SIP server is configured)
HT–486 fails to register

So basicly, that means your HandyTone 486 ATA fails to register with the SIP-server. That means you either have not recieved your IP-tele yet, or that your ISP have failed to register you.
Read full answer
Mar 04, 2010 • Grandstream HandyTone 486 ATA (HTATA486)
10helpful
2answers

Reset canon pixma MP 486
saya punya printer canon 486 baru berapa buala sudah minta direseter dimana saya harus dapatkan soft ware resetter nya
Read full answer
Jan 18, 2010 • Canon Office Equipment & Supplies
0helpful
1answer

My nitrobmw-486 amp keeps overheating
head gasket has gone
Read full answer
Dec 27, 2009 • Nitro BMW-486 Car Audio Amplifier
0helpful
1answer

Ricoh CL2000 SC486
it is the problem your cartridge sensor chip.You change cartridge unite & buy new cartridge than solve it
Read full answer
May 30, 2009 • Ricoh Aficio CL2000N Laser Printer
4helpful
1answer

Getting error code sc 486
Sometimes it seems to be that the sensor for the waste toner is picking up that it is full. If you clear the are that the the laser reads, many times this error code goes away. Also,, just replacing the waste toner cartridge fixes it.
Read full answer
Apr 03, 2009 • Ricoh Aficio CL3500N Laser Printer
0helpful
1answer

Service Code Error 486
Please contact your local service representative or original point of purchase for help.
The Service Call indicator looking like a spanner or wrench: char_ric20.gif shows that an error requiring inspection by service representative has occurred in the device.
If the problem is a sensor malfunction, you may be able to solve it and turn the indicator off using one of the following methods.
  • Turn the main power of the device off and on again.
  • If some parts or supplies were replaced recently, try removing them, replacing them again, and then turning the main power of the device on off and on. (If the device is interpreting imperfect parts detection as an error.)
  • The device might be interpreting extreme changes in temperature as an error. Turn off the main power switch, wait for a few minutes to cool it off, and then turn it on.
    Note:
    • If a fax is being sent or received, or printer data is being received, turning the main power of the device off may result in data loss. Ensure that the device is not being used for faxing or printing before you try turning the main power of the device off.
Note that "main power" means the actual, physical power switch.

You may find answers here:
http://www.ricoh.co.uk/KBase/KBLink.cfm?ProductUID=2496

Please remember to rate all users who assist you for free :)


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Read full answer
Oct 01, 2008 • Ricoh Aficio CL3500N Laser Printer
Not finding what you are looking for?

View Most Popular

Office Equipment & Supplies

Related Question

Modal mw40cj Imei 35**********486 Rck code Please send me rck code

  • Cell Phones

54 views

Ask a Question

Usually answered in minutes!

Popular Questions

Change delivery server IP Address

Office Equipment & Supplies

Service code 561 error

Lanier Office Equipment & Supplies

Lanier LW324 waste toner bottle full

Lanier Office Equipment & Supplies

How to enter service mode on a lanier ld225

Lanier Office Equipment & Supplies

Printing problem with lanier 6720 printer

Lanier 5235 Printer

Check Out the Latest Printers Report
Check Out the Latest Printers Report

View all Fixya Reports

Top Lanier Office Equipment & Supplies Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66847 Answers

Are you a Lanier Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
LD328_335_345c.pdf. user-manual-Ld328c...

Lanier Ld328c Ld335c...

PDF Manual
Http://www.ipvisual.com/nm/5235-5245ip...

Lanier 5235 Printer

Loading...