Question about Cooking
Posted by Anonymous on
SOURCE: lexmark x1270 poor printing
Try these steps after these if you face the same problem then you need to get the cart exchanged as it may be defective as Lexmark cart comes with 6 months warranty ...
# Hold the cartridge upside down, with the bar-code label facing you and take a damp paper towel.
# Use the towel to wipe the printhead of the cartridge on the bottom (where the ink comes out). Wipe the printhead horizontally in one direction only (left to right).
# Continue doing this until it looks clean.
# Then dab the cartridge on the towel to make sure the ink is flowing.
# Next, look inside the printer and locate the carrier that holds ink cartridges. Caution: Make sure the cartridges are not installed at this point.
1. Look for a shiny piece of metal underneath the contacts at the back of the carrier.
2. Take a damp cotton swab (use water only!) and wipe along the bottom of the shiny metal piece. Note: You may need more than one swab.
# Reinstall the cartridges, making sure you snap them correctly into the printer.
Posted on Jan 31, 2009
You are not asking too much and I believe that you can solve this problem in a menu option on your TV. Most systems designed to work with surround sound and/or by itself have some audio options that are designed to simulate or work in concert with surround sound. Start by looking around your TV menu options for something labeled digital audio compression or something like it. Sometimes there will also be a function in a menu to "simulate" surround sound attributes. Try to change these to factory or default settings, and if that still sounds the same try changing the settings around until you hear more accurate audio.
Posted on Apr 09, 2009
I have had the same problem It is the print head not the cartridge If your printer is still under warranty have the printhead(s) replaced if not Open the unit where the print heads are and hold the OK button for 5 seconds. The Print head carriage will move to the left
Carefully remove the KY (Black & Yellow) Print head with a cotton swab and alcohol clean the contacts and replace the printhead. If this does not work remove the printhead and then with a spray bottle spray the nozzle area on the bottom (DO NOT TOUCH THE NOZZLES AS THEY WILL BE DESTROYED) HP techs have told me this will void any warranty so act accordingly I use a printhead cleaning solution available from most any online ink supplier
Replace the printhead after it has dried out (less than a minute). The printer will then go through an alignment cycle and should print I had to do this several times before the print head performed as it should
Posted on Jun 16, 2009
It maybe on it's way out ,they don't last forever but try epsoms solutions
Posted on Jul 29, 2009
Tips for a great answer:
Mar 24, 2018 | Computers & Internet
Feb 28, 2018 | Higher Education (University)
Nov 08, 2016 | Computers & Internet
May 10, 2014 | Cell Phones
Mar 17, 2014 | 2003 Ford Expedition
Jun 08, 2011 | Computers & Internet
Apr 25, 2019 | Cooking
114 people viewed this question
Usually answered in minutes!