Question about EliteGroup P6IWP-Fe Motherboard

1 Answer

Motherboard manual EliteGroup P6IWP-Fe Motherboard

Posted by johnnie-a on

  • johnnie-a Nov 03, 2007

    IBM P6IWP-Fe mobo manual
    Serial no. EA=00D009DCEF32

×

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

There's two versions of your motherboard listed version 1.0a and version 2.0 i've listed the links for updated software, drivers, bios and manuals for both, though version 1.0a doesn't have a listing for a downloadable manual it has all the other bits and pieces, i've also listed the link to help you identify which version your mainboard is:

software,drivers,bios etc, ver 1.0a:
http://www.ecs.com.tw/ECSWebSite/Downloads/ProductsDetail_Download.aspx?detailid=95&DetailName=New&DetailDesc=&CategoryID=1&MenuID=6&LanID=0

software,drivers,bios, manuals ver 2.0:
http://www.ecs.com.tw/ECSWebSite/Downloads/ProductsDetail_Download.aspx?detailid=210&DetailName=New&DetailDesc=&CategoryID=1&MenuID=6&LanID=0

version ID help:
http://www.ecs.com.tw/extra/productinfo/MB.htm#ver_mb

Hope this helps you out

Posted on Nov 01, 2007

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Supports processors


go to this webpage
http://www.ecs.com.tw/ECSWebSite/Product/ProductArchive.aspx?CategoryID=1&MenuID=24&LanID=0
Identify your m/b - there is a ver 1 and a version 2 of the P6IWP-Fe. near the bottom of the linked page, which seem to blank, there some tabs; click the one labeled CPU. The list of supported CPUs will appear below (scroll down to see them) with the earliest BIOS version to support the CPU in the RH column.

May 30, 2014 | EliteGroup P6IWP-Fe Motherboard

1 Answer

No video on the monitor


maybe you need a new video chip

Jun 25, 2012 | EliteGroup P6IWP-Fe Motherboard

1 Answer

I use ibm p61wp-fe motherboard, it not work audio driver, please tall me audio drive name or download link.


Download DRIVER GENIUS:
Install then scan for missing & outdated drivers.
It will automatically download your drivers from their server.
After downloading install your drivers.
It's easy and safe...

If you find that this is information was helpfulto you, please rate me and leave a comment as this will encourage me to do morefree work for you and others. And please let me know if there's anything else Icould help you with. Without any inputswe cannot proceed assisting... Thank you for using FIXYA! Best regards,
Junior

Sep 14, 2011 | EliteGroup P6IWP-Fe Motherboard

2 Answers

Download driver


Use this site to locate the drivers you need for your motherboard and devices:

http://www.ecs.com.tw/ECSWebSite/Downloads/Downloads_list.aspx?MenuID=61&LanID=9

I hope this helps! If this did help you, please give a thumbs up!

Jun 28, 2011 | EliteGroup P6IWP-Fe Motherboard

1 Answer

P6iwp-fe max processor support ram max support


Intel PentiumIII, 512mb RAM max. an old board!

Jan 11, 2011 | EliteGroup P6IWP-Fe Motherboard

1 Answer

Error loading operating system


check the capacitor in to your board and check if there is not capacitor globe.

Nov 03, 2010 | EliteGroup P6IWP-Fe Motherboard

4 Answers

P6IWP-Fe power up problem


Try to change RAM first..if not worked then the processor ...

Dec 09, 2008 | EliteGroup P6IWP-Fe Motherboard

1 Answer

Suitable replacement motherboard


Howzit
Okay, the problem here is that there is no guarantees when hottswaping motherboards. First It helps if the mboard your swap to is of the same manufacturer thus this eliminates some driver identification problems with XP. Second the socket set (as you said PGA370) must be the same. Then VGA setup must be the similar as in, if its onboard on the first mboard it must be onboard for the second mboard. Otherwise you should be fine. Another option that you did not mention is creating a second partition on the harddrive and installing XP with any other motherboard onto that pertition you created. That way you can just simply copy you information across when you are running with your new mboard (this may be your best option) . Let me know how you go. Thanks

Regards

Oct 29, 2007 | EliteGroup P6IWP-Fe Motherboard

Not finding what you are looking for?
EliteGroup P6IWP-Fe Motherboard Logo

Related Topics:

823 people viewed this question

Ask a Question

Usually answered in minutes!

Top EliteGroup Computers & Internet Experts

Thomas F. Schneider

Level 3 Expert

2715 Answers

Ekse

Level 3 Expert

13434 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you an EliteGroup Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...