Replacement Parts for Fitness Exercise Equipment at SPORTSMITH
Error 5, No Slack, Cybex/Tectrix Climbmax 2000/3000, 700S and 800S Steppers
Probable Cause
An error 5 on the Tectrix Climbmax models 2000 and 3000 as well as Cybex stepper models 700S and 800S indicates the following:
a) Test switch is in test mode.
b) Possible cut in display cable.
Corrective Action
a) Adjust slack switch.
b) Inspect display cable; Replace cable if necessary.
Error 5 No Slack on Cybex and Tectrix Steppers Climbmax 2000 3000 700S 800S
Replacement Parts for Fitness Exercise Equipment at...
SPORTSMITH Fitness Equipment Parts...
Error 5 No Slack on Cybex and Tectrix Steppers...
Let us help you with an error 5 on...
SOURCE: i need a Tectrix Personal Stair Climber repair
Testing by FixYa Staff
Please do not rate this post!
We apologize for any inconvenience.
SOURCE: need to find part numbers for bearings on a
Those are always marked on the bearing shield itself. Look for a number that looks like this: RS 6802 RS or 6104 R.... it will be a letter/3 or 4 digit number/ letter combination.
SOURCE: I have Tectrix Personal Climber. The on/off
No I believe that switch is the problem your Tectrix PC Is part of Cybex International and their phone # is1-800-677-6544 now if they do not have this part then call National Gym Supply @ 1-800 496-7278 the Personal Climber and The Climax ( commercial unit) uses the same switch assembly.
291 views
Usually answered in minutes!
×