Question about RCA F32648 32" TV
Check the speaker/s first. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis.
If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy. Surf the site with patience. Pull up older posts. Surf the site with patience.
Posted on Apr 10, 2014
I have had this problem on this same model (F32650) and I discovered that what is happening is that dust and debris are causing the microswitches in the panel to short, therefore the channel starts changing and wont stop or the volume changes etc...
Get some electronic switch cleaner and (with the power off of course!) spray into the crevaces around each button and press each button a few times and then power the unit back on and it should be fine.
Posted on Jun 17, 2009
There should be a setting that allows you to set the "Power On" volume level. Check the menu Under Volume settings.
What is the make and model of the Television set?
Posted on Nov 22, 2012
Tips for a great answer:
Dec 15, 2015 | Emerson Televison & Video
Jun 21, 2017 | Coby Audio Players & Recorders
Dec 05, 2012 | Televison & Video
Jun 22, 2012 | Emerson Televison & Video
Jun 02, 2011 | Emerson LC320EM8 32 in. LCD TV
Jan 14, 2011 | Emerson LC320EM9 32 in. LCD HDTV
May 26, 2010 | Emerson EWF2004 20" TV
Oct 18, 2009 | Televison & Video
Jun 18, 2008 | Toshiba 32AF43 32" TV
Jan 09, 2008 | Televison & Video
Jan 10, 2012 | RCA F32648 32" TV
22 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: