Question about Invacare Supply Group Invacare Pronto M51 Power Wheelchair - Blue - Power wheelchair

Open Question

Have a Jazzy Select. I was riding on a sidewalk, noticed there was a slightly raised "lip" of sidewalk in my path. Chair hit that lip and batteries acted dead but when I pressed the reset button, all

COPY: "Add more details"? Certainly will add a detail I feel is very important. This power chairs' undercarriage lowest height-above-ground is ONE HALF AN INCH. I have mistakenly driven over a large "pebble" and the chair has been caused to spin out of my control. I still feel that if this chairs' undercarriage height above ground had not been made so low, this issue might never have happened. I am hoping someone could advise what the nine lights a'flashing...NOT appearing to run back and forth on the arc...and am hoping someone might tell me what should be done next. Also what those flashing lights mean since I understand other numbers of lights indicate what a problem may be.

Posted by Anonymous on


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do you lower the seat on a jazzy select power chair?

See the links

[PDF]Jazzy Select Series - Pride Mobility
Jazzy Select 6 with Power Seat. JAZZY. SELECT SERIES. Including Models: ... setup of this power chair and must perform all of the procedures in this manual. .... Use only AGM or Gel-Cell batteries to reduce the risk of leakage or explosive.

[PDF]Jazzy Select Series - Pride Mobility Reduce your power chair's speed when driving on uneven terrain and/or soft .... The Jazzy Select Series Power Chair has two main assemblies: the seat ...

Comfort Adjustments; Seat Height Adjustment - Pride Mobility Jazzy ... > ... > Scooter > Jazzy Select gt > Owner's manual Pride Mobility Jazzy Select Gt Manual Online: Comfort Adjustments, Seat Height Adjustment. ... power chair and made any necessary adjustments to suit your specific requirements. ... Raise or lower the seat post to the desired position. 9.

Jun 04, 2018 | Select Health & Beauty

1 Answer

Can I use the serial number to find out what Model Jazzy Power Chair I have

Hi batteries for jazzy GT. ::: UPG UB12350 12V-35AH internal thread. E/Bay sell a 2 pack US $119…99 Cheers

May 05, 2017 | Select Health & Beauty

1 Answer

Chair controller flashes 10 bars 9 times and wont move?

I don't have a Jazzy 1113 ... mine is a jet 3 ultra and the controls seem to be identlcal and it too acts similarly particularly if I come to an abrupt stop by hitting an unseen object on the floor or a slightly raised threshold.
What I do is turn it off (power button) and after a few seconds turn it back on and find that the chair is ready to go again then I back up to see what that I hit.
The chair is very sensitive to approaching a threshold and the correct method is not to do it at an angle but in a direct (not angular) fashion.
Hope it helps,

Dec 25, 2014 | Pride Jazzy 1113 Power Chair

1 Answer

I have new batteries but no lights come on. What could be my problem

This usually requires carefully checking the path. Are the connectors corroded? Are the fuses OK? Are the circuit boards toast? Was something unplugged?

It is a pain in the neck, but you just got to go step by step and check everything.

Aug 10, 2014 | Pride Jazzy 1103 Ultra Standard Power...

1 Answer

Power light is on the charger but no movement from the jazzy select chair

You have to disconnect the charger in order for the chair to move. It automatically removes power from the controller while the batteries charge.

Jan 08, 2014 | Pride Jazzy Select 6 Indoor Power...

1 Answer

I have a jazzy select power chair and i need to know how to take batteries out of the chair to replace

Please download the 'Owners Manual' from the web page that I have provided the link for below. Instructions on battery replacement can be found on page 41. Hope this helps.

Jan 25, 2013 | Pride Jazzy Select 6 Indoor Power...

1 Answer

My battery charger for my Jazzy 600 does not light up or get warm when I plug it in. The chair has not been used for months.

I tried to charge my jazzy. The charge light (red) remained on for several hours. Finally I moved the wire slightly the charge light turned green than faded to red. What is my problem? Your solution would be greatly appreciated.

Jun 04, 2012 | Pride Jazzy Select 6 Indoor Power...

1 Answer

My Jazzy wheelchair shuts down often when I was riding it, I thought it was the battery problems, I replaced t he batteries, and it still do the samething to me, what can be the problem?

check the inline fuse on the pos side of the battery it is encased in shrinkwrap,if it is loose the chair will act dead and everything will test good.I had this problem on my jazzy select14,and just happen to find it out by chance. an easy way to see if it is the fuse is to take it out and see if it works,without it.anyway good luck! and happy riding!!!
J Olaf

Jul 31, 2009 | Pride Jazzy Select 6 Indoor Power...

1 Answer

Elctric wheelchair, flashing rapidly the error display

Have the batteries load tested and be sure that the chair is in gear.

Feb 03, 2009 | Select Jazzy Used Electric Wheelchair

Not finding what you are looking for?
Invacare Supply Group Invacare Pronto M51 Power Wheelchair - Blue - Power wheelchair Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Invacare Supply Group Health & Beauty Experts

Rob Hill
Rob Hill

Level 3 Expert

1414 Answers


Level 3 Expert

85239 Answers

Lawrence Oravetz

Level 3 Expert

10548 Answers

Are you an Invacare Supply Group Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides