Printing half of a job - Roland VersaCAMM SP-540V

I would suggest using the printers self head cleaning as it sounds like the heads need cleaning

i aint too sure if its the same but i had an epson printer with the same problem last year it would print half a page spit out and then print the same half a page again and just stuck in a loop even on printing disks it did the same i found out after by speaking to a printer specialist it was the printers eeprom which is the printers memory bank that was failing and nothing can be done with it

please your job is currently page in center select ? if yes
when you go aply print and so the print priveu youn so the all job in page ? if yes and aply print is ok.

you might have a print job in the spooler, right click on your printer icon, select open and right click on any jobs, and select delete.

I have two problems. Either it won't accept a print job or when it is printing it stops when it is going through the job intermittently. Like for an hour it won't continue then all of a sudden it prints one page then a half hour later another page etc. It is so frustrating.

just reset the printer to factory settings , use the menu to find factory settings .

try to clean the print heads of the ink cartridges. you can do it in the HP solution center. you can run it through all 3 tests so you make sure its clean. if it doesnt work after that, your ink cartidge level might be off, because i hear they never work half the time anyways. i would buy new ink if the cleaning the heads does not work. good luck!

trying to print the las job you had.
Try hiiting the cancel button when you turn it on

I think their is leser is not taking fully of the document some problem in hardware.

Try cleaning your heads with appropriate solution. Then, cancel all print jobs. Try again. If it does the same i would turn it off, inplug all the cables, replug all and turn on. Try again. If still no good, completely unistall printer then reinstall it. Try once more. Good luck