No sound and no picture

Another problem is one or more bad capacitors in the SMPS area. Set will not even try to run if bad.

sounds like the Main Elec on the PSU is bad and needs changing

Three red light blinks shows that lamp cover is not properly closed after lamp replacement. Make sure that the lamp cover is in its proper position. Try to reset the lamp cover and turn it on clockwise direction until you heard a click sound of a micro switch activated by the lamp cover, then put the set on..

i had the same problem a while back. I fooled around with my camera lens a bit and it turned out that one side of the lens was sticking out a bit. I pressed down on this and pushed the power button and it worked. The next time I turned it on the same thing happened but if you keep doing the same thing it should work.

Hope this helps!

Brother this is problem usually  when either the fly-back (picture tube transformer )or tube  voltage regulator  Transistor is damaged or the picture tube has a short 


Best of luck 

Hi, sounds like you`ll need that tech again, your description sounds like a bad color wheel, if you let it continue and it shatters it can & probably will destroy your light tunnell, sorry for the bad news but now you know not to keep running the set, this is a very common problem with dlp`s and it`s exactly why we tell our customers not to purchase dlp`s, gl, video-tek

hiya

this sometimes is quite simple to fix as it cud be a dry joint on the circuit board where the tube motor sits.


or it cud be the tube is on its way out, which wud be cheaper to buy a new tv rather than have it fixed

rik

My GE 32 inch won't come on, when you turn it on you can hear click two to three times then it comes off.

I have another 32 inch GE TV that has no picture except white/gray light on the picture tube, but there is sound

clicking,w/no sound or pix is usually IHVT, AKA flyback transformer.Please clarify size and model #. Include last three characters in Thomson products service #---Ex.=F36665-YX01.