Error cannot render project when printing

* Check your warranty. Call for support.

*** Following is for information only.***
* Brand and model for specific solution.
* It's probably stuck in error mode. Looking for ink, cartridge level, ID of ink cartridge, communications issues, etc.
* Open your printer control panel on computer to monitor status.
* Stand alone wireless printers will cycle through it's checks and flash ready or error report (by flashing certain lights) you will need to check paperwork for error report.
* Note that with new models(especially cheap units) They tend to take a Long time to process prints and print out. Many render the document to a printer format then print. Copies have to render for each copy.
* I find it faster to render and print one original. Then use the printer's "scan" and "copy" mode as it will not use the render process. Scanning is faster and only done once per "Batch".
Aloha, ukeboy57

you need to create an image of the file that you want to put on dvd

This is vital point which can be consider as workaround:
v Go to the document library in which project files resides
v Hover your mouse to any project file and select 'edit in Microsoft Office Project'
v It will give you a pop up by selecting the 'SharePoint drafts' option
v Click ok / you can do a check out also by selecting the 'SharePoint draft' option
v Now the document is in check out condition so go to the SharePoint drafts location on your machine (Location: \My Documents\SharePoint drafts)
v Open the document by means of draft location, do the changes and save it.
v Go back to the SharePoint site and check in the document.
v Changes will be successfully saved without any problems
Try to install this app Recovery Toolbox for Project
http://www.project.recoverytoolbox.com/
Here's one thread like yours. It could be useful for your, read http://www.filerepairforum.com/forum/microsoft/microsoft-aa/project/625-project-error-"an-import-error-occurred"

Has it worked before on that computer? If it is a new installation (I mean never before used, not recently installed) you should try to reinstall it.

If you have used this progran before (on this computer) I sugest that you should goto http://support.encore.com/

No, you can't. I'm terribly sorry as I know the pain of losing your hard work to a stupid error. I'm sorry, but there is no way.

Hi and Welcome,


If you are experiencing Export Errors using Studio, the following FAQ should help:
1. UPDATE TO THE LATEST PATCH:

Click here for the latest Studio 12 patch
There is no patch available at this time for Studio 14
2. ENSURE BACKGROUND RENDERING COMPLETES:

Allow the green bars that appear over clips that have had filters, transitions or other effects added to complete before going to the Make Movie stage.


3. ALWAYS REINCODE ENTIRE MOVIE

If after installing the latest version of Studio, the Export Error persists and you are attempting to create a DVD, then in Studio click on the Setup pull-down menu and select Make Disc. On the top portion of the Make Disc tab make sure there is a check in the box for the setting "Always re-encode entire movie", then click the OK button. Create the DVD again.


4. DELETE AUXILIARY FILES

Delete the auxiliary files before rendering. To do this, go to File >> Delete Auxiliary Files. This will bring up a window to chose which auxiliary files will be deleted. Select the option to delete the files for the current project. Once this is done, try to output the project.

the first thing I suggest you find out is if project 5.2 allows you to import the file from fuity loops 8 in the source format. keep in mind that as versions get upgraded backwards compatability inter-vendor compatability or format compatability in genera may be compromised along the way.

I would suggest to try to save your file from fruity loops 8 in another format that may be compatible with project 5.2 or simple save the same file in all formats avaliable and try one by one in project 5.2 and see if you get the file to play properly.

good luck!

I have also been running into an MPEGENCODER.DLL error about 1/2 way through my 20 minute movie. I am able to Make Movie with a 6 minute version, but hitting this error time and time again. I have removed Virus protection and all unessential system tray loads; defragged drive; downloaded newest Windows drivers; downloaded newest NVIDIA drivers; running Win XP Pro SP3, Intel 3GHZ, 1GB RAM, 76GB/10K spin drive.

when you have that problem to view your video, render your video format properly like example using an extension of avi or mpeg...

I would suggest u to reinstall the software. after this it should work