Canon PIXMA iP3000 InkJet Photo Printer Logo
R
Robin De La Torre Posted on Apr 09, 2014

It will not trurn on does the ac adapter need replacement it is over 10 yrs old

1 Answer

Danny Grantham

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 3 Answers
  • Posted on Apr 25, 2014
Danny Grantham
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Nov 20, 2012
Answers
3
Questions
0
Helped
24765
Points
3

Look at adapter, see what output is supposed to be- maybe 12 volts DC? Find a multimeter that will measure DC voltage, and see if the output plug has that across the connector. If you have an ordinary power cord without an adapter, it will have 120 volts AC like any other cord, which you can also measure on AC scale, but be careful as you can get a dangerous shock, just like you can from an ordinary household outlet.
Note: AC voltage may vary by country.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I want to plug an AC adapter into the DC input (normally runs on 3 AA batteries. How much output should the adapter put out?

U don't plug an ac adapter into a dc input. U need a 5-6 volt DC adapter - make sure you observe correct polarity.
1helpful
1answer

Wii no longer turns on! no power??

  1. Unplug the Wii AC adapter at both ends (from the back of the Wii system and from the wall outlet or power strip).
  1. The AC adapter must remain unplugged at both ends for a full two minutes.
  1. Unplug anything connected to the USB ports and the Nintendo GameCube Controller ports (such as LAN Adapters, keyboards, Nintendo GameCube controllers, etc.).
  1. Check the AC Adapter for the following:
  • Make sure that the word "Wii" and the model number "RVL-002 (USA)" are molded into the AC adapter. Unlicensed products are not fully compatible and may not work correctly.
  • Check the AC Adapter for physical damage. Physical damage, such as frayed wiring or a cracked housing can cause the system to shut down. If the AC Adapter shows signs of physical damage and needs to be replaced, a replacement can be purchased from Nintendo's online store.
  1. After waiting two minutes, plug the AC adapter into the Wii system and directly into a wall outlet, not a surge protector or power strip. If the power light comes on and stays on, then the AC Adapter reset was successful.


If you need further help, reach me via phone at https://www.6ya.com/expert/eric_5b00a5ceab1c0cd2

0helpful
3answers

My Dell Inspiron 1525 is now around 4 years old and recently it has not been able to charge and only works when it is plugged in. Also when i start the laptop, it displays a message saying i need to...

As you say the system is 4 years old update the bios
your download link is here!
IMP. Be sure to plug in the battery and it should be charges above 10 % and the system should be connected to the mains power supply also ensure there will not be a power outage during the update process
this will resolve the issue 100 %
Dont forget to say thanks!

0helpful
1answer

Dell XPS 1530 wont power on at all..

Troubleshooting is pretty simple.
  1. Try a different Dell 90W or larger D/E-Series AC adapter and see if the system gets power. If no known good AC adapter is available, then check output voltage of AC adapter (Should be about 19VDC or so) If you can't do either, then the AC adapter is still the cheapest item to replace for a no power issue.
  2. If system will not power on with a known good AC adapter or new one, then the motherboard is the likely failure point. Roughly $150 on Ebay
2helpful
1answer

I need an AC 12v-5v powr adapter for a PROSCAN TV.

USE a simple laptop adapter thats whhat i did just tell the guy at local comp store 12 volts and 5 amps they should have 1 or able to order it also try a used comp store they abound on craigs list and kijiji canada
3helpful
1answer

Notebook will not boot up

First take out your battery. Now plug in the AC adapter and turn on the unit. If it comes on, then let the battery "Rest" for a couple of hours. If it does not come on then your unit needs to see a reputable repair person.
0helpful
1answer

No power at all for my Dell Latitude D505

Sounds Like From Your Description That You Need Your DC Jack Repaired/Replaced..

THe DC Jack Is the Port where Your AC Adapter Plug Plugs into on the laptop.... THis can be proprietary or non proprietary.... But Either way, the Old Faulty Jack Needs To Be Desoldered and Removed, THe Board Cleaned and a New DC Jack Soldered On.. You Will Then Be able To Power On Laptop With AC Charger and Will again Be Able To CHarge The Battery..
0helpful
4answers
0helpful
2answers

Need a new adapter TAD-10 need locations- Thank you

You can buy an after market Tad-10 tad10 ac power charger adapter for your Durabrand PDV-709 here:

http://www.acdapter.com/DURABRAND_PVD_AC_ADAPTER.html

Not finding what you are looking for?

131 views

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2426 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...