Question about Sony KP-46WT500 46" Rear Projection HDTV-Ready Television

1 Answer

KP-46WT500 My Sony was having Color Convergance problem, I put Two new color convergace IC's with same STK number. It not only have same problem but also it seem's the picture is bowed on top and bottom. I have check and recheck all solder joints what am I missing? Does it need to be rest after such repair? or did I get bad IC's.Please help!!!

Posted by Time Center on

  • 1 more comment 
  • Anonymous Nov 03, 2007

    my picture starts out fine but after 10 seconds or so it gets a blue tint and the picture gets a lot screen also has thin dark blue lines that run through it

    mike g.

  • Rocket12s Nov 23, 2007

    I too replaced my convergence IC's but I still have the same problem with the picure convexed. (The top and bottom run toward center) I've read that a lot of this can be fixed using the PJE via remote but I'm not so sure it isn't something else instead. I rad somewhere else that there is a voltage adjustment in the front of the unit and I am looking for this post. Any ideas gurus's?


  • Ramon Diaz
    Ramon Diaz Nov 19, 2013

    I have a sony TV mod. Kp-46WT500 and does not turn on and the front red light blinks 6 times in a row. That might have?



1 Answer


Well after rechecking everything again and did some checking with help of some other emailers, I found a blown fues on the G board, that should fix my problem and maybe some others.

Posted on Nov 02, 2007


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

KP-46WT500 46 in. Rear Projection HDTV-Ready Television convergance adjustment

Try using the MENU button on your remote control to go into the TV picture settings menu. Change the mode to NATURAL, You can also try to manually adjust the color in the COLOR SETTINGS mode.

If that doesn't work, check out the handy troubleshooting chart in TV color problems and see if another solution will work. I hope this helps!

Sep 13, 2012 | Sony KP-46WT500 46" Rear Projection...

1 Answer

Convergance color off set on screen

very common problem the 2 convergence ICs and the pico fuses will need to be changed. The Sony type 1 convergence repair kit from is the correct kit for your model and contains the two ICs and the 8 pico fuses plus the CD with repair instructions.

Oct 04, 2011 | Sony KP-46WT500 46" Rear Projection...

1 Answer

I'm having triple image and a color problem with my Sony color rear video projector modle No.kP-53HS30

Hi,that is come from your convergence module,theres some ic in there call stk wheres they controls the picture linearity but
you will need a technician to fix it...
hope that will help you
regards Alan

Oct 26, 2010 | Sony KP-53S25 53" Rear Projection...

1 Answer

Sony KP-46WT500 Red, green and blue lines appearing on screen

your convergence IC;s are out, they cost about $40, if you know how to solder, you can do it your self, if not , I would try to find somone that can, service centers charge about 4 or 5 hundred, after you get the new ones, there easy to find on the board in the back of the tv

Nov 26, 2008 | Sony KP-46WT500 46" Rear Projection...

1 Answer

Color convergance

stk-392-560 ic 8001 &8002 on d board

Apr 20, 2008 | Sony KP-51HW40 51" Rear Projection...

1 Answer

No color and green and or purple color stripe

Yes, sounds like the convergance IC's. They will need to be replaced.

Apr 13, 2008 | Sony KP-46WT510 46" Rear Projection HDTV

1 Answer

Power surge may have blown tv- Sony KP-46WT500- worth fixing?

Take a look at my post on Convergence IC replacement..Thank you GURU JAY

Feb 18, 2008 | Sony KP-46WT500 46" Rear Projection...

1 Answer

Loss of electricity due to the ice storm...

if it worked before and not after i would claim it, also sometimes if you complain to the electric company they will foot the bill on there insurance. power surge can cause all sorts of problems . just my 2 cents.
now this set is also know to have bad convergance ic
check this site out for repairing it.

By manual convergence, if you mean electrostatic convergence, then I'm not sure this is included in the service manual. However, if you join the group, there is a file download called ws500tweaks.doc that documents this (with the usual caveats, like don't get yourself killed, when in doubt hire a pro, etc).

Dec 19, 2007 | Sony KP-46WT500 46" Rear Projection...

1 Answer

Color is messed up

sounds like bad convergance ic

Dec 14, 2007 | Sony KP-46WT500 46" Rear Projection...

1 Answer

Picture curved and three pictures - one per color

convergance amp ic are bad.
can you confirm the make and model.

Nov 24, 2007 | Sony KP-46WT500 46" Rear Projection...

Not finding what you are looking for?
Sony KP-46WT500 46" Rear Projection HDTV-Ready Television Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76287 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers


Level 3 Expert

13434 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides