Yes i have tappen gas stove tha ti got in 03...i recently had a problem with it that gave a code of f 1...i read up on it and it said replace the electronic control panel. i got a new one and put in in and everything works but the oven will not come on. when you hit the pre-heat or bake button nothinghappensi hit the clean button and it comes on..so the oven will heat...whats the deal..oh yea the model number is NF31416009
Find the bake ignitor (you may need to remove bottom drawer or oven cavity floor to get to the ignitor). Turn on the bake. If the bake ignitor comes on (starts glowing after a few seconds) - check the amperage on the bake ignitor wires when it's on. If the ignitor is a round style - amperage should be 2.5-3A, if the ignitor is rectangular - 3 - 3.6A. If less than 2.5A or 3A respectively - replace ignitor. If the ignitor does not come on - check the voltage on the ignitor, should be the line voltage 110-120v AC. If there is a line voltage on the ignitor and it's not coming on - replace.
Ignitor part numbers for round style ones: 4342528, WB2X9154, SGR403, 5304401265;
rectangular styles: 12400035, WB13K21, WB2X9998, SGR412, NR020, 5303935066, 814269, 9753108.
Ignitors of the same shape (i.e. rectangular) are interchangeable, if you can splice the wires.
Good luck!
136 views
Usually answered in minutes!
×