Question about Pinnacle Studio MovieBox USB Video Capture

1 Answer

Pinnacle MovieBox USB Power

My Pinnacle Studio MovieBox USB Video Capture device does not appear to turn on. I have Pinnacle 8 software and moviebox usb drivers installed. Help! Thank you so much

Posted by Tscott on

  • FlickerFree Dec 17, 2007

    I have lost the power adapter for my Pinnacle Moviebox USB2. Does anyone know how to get a replacement?

×

Ad

1 Answer

Mark Klabunde

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

You can use a universal one but it has to be 3.3 Volts at 3 AMPS and the tip of the plug must be positive. If you have a radio shack by you they should be able to get you the correct adaptor.

Thanks,
Mark

Posted on Jan 24, 2008

  • videoaud Dec 06, 2010

    I have the same problem . I lost the power adapter and there is not any voltaje and polarity indication in the set or in the manual. I am no sure if the last help give the solution.
    please Help me.
    Marcelo Gomez - Ecuador [email protected]

×

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a pinnacle moviebox 510-usb. The specification contains, you can streaming from analog secam source, but in importer section i can't see any video after switched secam mode, while the vcr play...


Be sure that your MovieBox capture device is selected under Studio's "Setup/Capture Source" selection (assuming you're capturing analog). If the MovieBox doesn't show up in that selection window, there could be a problem with the device.

Additionally, check in the Diskometer left-hand panel (this is found at the center of the bottom of the screen) and see that the correct input port value (either composite or s-video) is selected.

If you're capturing digital, then you'll have to use a Firewire connection to the MovieBox device.

Hope that's helpful.

Dec 31, 2010 | Pinnacle Studio MovieBox Plus - Video...

1 Answer

I have the Moviebox USB (the Porche design) I'm running Studio 14 on windows 7, but it wont detect my moviebox? The pc tels me it works fine, but the Studio wont detect it. I have tryed the hardwaredrivers...


I have the same problem. If you have an earlier version of Studio (i.e.; Studio 12) with which Moviebox USB works, then retain that version for capture. For all else, use Studio 14 by retrieving your captured footage from your hard drive.

Aug 20, 2010 | Pinnacle Studio MovieBox USB Video Capture

1 Answer

I need a MovieBox DV (1394)driver compatible with


Pinnacle Software has a Vista Patch to use with their applications that you have to download and install. I had this same problem when I used Pinnacle for my remote camera system.

Jun 25, 2010 | Pinnacle Studio MovieBox DV 9 (210100349)...

1 Answer

Does moviebox usb work with studio 14 and vista? I can't get my camera to show as an import device when connected to the movie box.


This is the latest hardware device that can used for Studio 14.

Check the list.

USB based
  • 710-USB
  • 510-USB
  • 700-USB
  • 500-USB
  • MovieBox Deluxe
  • DVC-103
  • DVC-107
  • DVC-100
  • DVC-90
  • DVC-130 (There are no 64-bit drivers for this product.)
  • DVC-170 (There are no 64-bit drivers for this product.)
PCI based
  • 700-PCI (a.k.a. Pinnacle Studio Deluxe 2)
  • 500-PCI (a.k.a. Pinnacle AV/DV)
  • Any 1394 cards.

Are you using vista 32 or 64 bit system? If Vista 64 bit there is no driver for your device and the only available is 32 bit only. Aside from that you can check also the video cable you were trying to used. If firewire under import/capture tab of Studio 14 you need to select the name of your camcorder or dv camcorder. Check that out and try.










Dec 07, 2009 | Pinnacle Studio MovieBox USB Video Capture

1 Answer

Does moviebox usb work with studio 14 on vista?


i want driver for pinnacle movie box deluxe usb on windows seven7 thanks

Dec 07, 2009 | Pinnacle Studio MovieBox USB Video Capture

1 Answer

Pinnacle Moviebox Deluxe - Error "USB Device Not Recognized"


Turn off CPU, Unplug Power cable, And all usb devices, let it sit for about 20mins. Plug it all back in. Turn on the CPU!

Feb 07, 2009 | Pinnacle Studio MovieBox USB Video Capture

Not finding what you are looking for?
Pinnacle Studio MovieBox USB Video Capture Logo

Related Topics:

2,292 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pinnacle Televison & Video Experts

Vernon Taylor

Level 3 Expert

6189 Answers

Jim

Level 2 Expert

158 Answers

Are you a Pinnacle Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...