Conair garment steamer gs100t

Try draining out water and refilling it. sometimes there are deposits blocking

make sure its not clog or the safe is not been kick.

Get a needle and clean all the nozzles, since they work with hot water they tend to get clogged with a white built up.

Clean the nozzles with a needle

Plugged in? Add water? Check the fuse on the power cable.

If it were left on its possible that the element that heats the water has burned out think blown light bulb have your Mr Test it with a ohm meter to see if the circuit is open

Best way is to contact manufacture and ask for part dealer near your location

It could be broken but it could also be jammed or clogged by some dirt or water. My first answer would be to get a new one. but if you dont want to throw it away you should take it to a recyling store.i know that is getting rid of it but it is not exactly because you still remember it.

Need Water Tank top cap which is brocken

steamers are usually believed to be easier to use and less damaging to the fabric over time