Question about Washing Machines

1 Answer

ERROR CODE E57 indicates what? - Washing Machines

Posted by Luis Dominguez on

Ad

1 Answer

Ted Poineau

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 9 Answers

For most questions you should supply as much information as possible, especially manufacturer & model #.

I'm sure error codes are different by manufacturer.

I found this answer for an electrolux;
Regrettably, error codes E57 and E58 could mean a number of issues, but primarily that the motor is overheating or a higher-than-usual motor current caused by other issues. Typically, an experienced technician would remove the belt to check the motor and motor pulley to ensure all is in working order first. Their next step would be to check the tub pulley and tub bearings. Last items they would examine would be the drive motor and speed control board by ohm measurement. Once the tech has ruled out a number of possibilities, he or she can pinpoint the exact problem and the necessary part to fix the issue. Since parts can often be quite costly, I would personally recommend reaching out to a qualified tech who can accurately diagnose the issue your unit is experiencing.

Posted on Apr 06, 2014

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to unlock door on Siemens iq 700 showing error code e57


go to the manufactures website and download the user manual it normally free to download

Dec 24, 2017 | Siemens Washing Machines

Tip

Frigidaire Affinity Common Error Codes. (E4A, E9E, E56, E46 and more)


Hi.

This error codes apply to Frigidaire Affinity washers and dryers:

E11 - Fill time too long.

E13 - Water leak in tub, or air leak in air bell.

E14 - Reed switch.

E21 - Water not pumping out fast enough.

E23 - Drain pump relay on control board failed.

E24 - Drain pump relay on control board failed.

E31 - Pressure sensor not communicating with control board.

E35 - Pressure sensor indicates water overfill.

E41 - Control board indicates door switch is open.

E42 - Door remains locked after cycle is completed.

E43 - Control board problem

E44 - Control board problem.

E45 - Control board problem.

E46 - Control board problem.

E47 - Control board is sensing the door PTC circuit is open during spin.

E48 - Control board is sensing the door PTC circuit is closed.

E4A - Program Timeout Fault.

E52 - Bad signal from tacho generator.

E55 - Motor overheating.

E56 - High motor current.

E57 - High current on inverter.

E58 - High current on motor phase.

E59 - No tacho signal for 3 seconds.

E5A - High temperature on heat sink.

E5B - High temperature on heat sink.

E5C - High temperature on heat sink.

E5D - Communication problem.

E5E - Communication problem.

E5F - Communication problem.

E67 - Input voltage on microprocessor incorrect.

E75 - Water temperature sensor circuit (digital readout models only).

E76 - NTC temperature for the cold water valve over the limits

E95 - Communication error.

E9E -Voltage error.

EB1 - Incoming power frequency out of limits.

EB2 - incoming line voltage above 130 VAC.

EB3 - Incoming line voltage below 90 VAC.

EF1 - Clogged drain pump.

EF2 - Too much soap.

on Apr 09, 2010 | Frigidaire Affinity ATF7000ES Front Load...

1 Answer

What does error code E57 indicate?


E57 means that your inverter board is drawing too much power' below link shows where and how,
press the helpful button


GE Front Load Washer Inverter Removal

Jan 25, 2016 | Washing Machines

1 Answer

Bosch washing machine (logixx 8) shows error code F57


The E57 error code on the Bosch Logixx 8 means that there has been a door lock fault.

Feb 13, 2015 | Bosch Washing Machines

1 Answer

What is error code E57?


E57 Checksum failure Software error occurs - checksum failure. Non-recoverable error. Main control board must be replaced.
:(

Nov 07, 2014 | Washing Machines

1 Answer

Loc error code Frigidaire frontloader


From the frigidaire site.

Error code - Fault condition

E11 Fill time too long.
E13 Water leak in tub or air leak in air bell.
E14 Reed switch.
E21 Water not pumping out fast enough.
E23 Drain pump relay on control board failed.
E24 Drain pump relay on control board failed.
E31 Better models. Pressure sensor not communicating with control board.
E35 Better models. Pressure sensor indicates water overfill.
E41 Control board thinks the door switch is open.
E42 Door remains locked after cycle is completed.
E43 Control board problem.
E44 Control board problem.
E45 Control board problem.
E46 Control board problem.
E47 Board thinks the door PTC circuit is open in spin.
E48 Board thinks the door PTC circuit is closed.
E52 Bad signal from tacho generator.
E55 Motor overheating.
E56 High motor current.
E57 High current on inverter.
E58 High current on motor phase.
E59 No tacho signal for 3 seconds.
E5A High temperature on heat sink.
E5B High temperature on heat sink.
E5C High temperature on heat sink.
E5D Communication problem.
E5E Communication problem.
E5F Communication problem.
E67 Input voltage on microprocessor incorrect.
E75 Better models only. Water temperature sensor circuit.
E76 Better model only. NTC temperature for the cold water valve over the limits.
E95 Communication error.
EB1 Incoming power frequency out of limits.
EB2 Incoming line voltage above 130 VAC.
EB3 Incoming line voltage below 90 VAC.
EF1 Clogged drain pump.
EF2 Too much soap.

Jul 24, 2014 | Frigidaire GLTF2940ES Front Load Washer

1 Answer

My electrolux EWFLS70JSS front load washer is showing a E57 error and is not entering spin cycle.


Hello Walter, thank you for your post!

An error code E57 could mean a number of issues, but primarily that the motor is overheating or a higher-than-usual motor current caused by other issues. Typically, an experienced technician would remove the belt to check the motor and motor pulley to ensure all is in working order first. Their next step would be to check the tub pulley and tub bearings. Last items they would examine would be the drive motor and speed control board by ohm measurement. Once the tech has ruled out a number of possibilities, he or she can pinpoint the exact problem and the necessary part to fix the issue. Since parts can often be quite costly, I would personally recommend reaching out to a qualified tech who can accurately diagnose the issue your washer is experiencing.

Hope this proves helpful!

Jan 16, 2014 | Electrolux EWFLS70JSS Washer

1 Answer

Bosch logixx 8 E57


Circut board of the motor is demeged.if you take out the board witch is next to the moyoryou will see on the electronic print
The demeg.

Nov 20, 2013 | Bosch Logixx WAS2446 Front Load Washer

1 Answer

Frigidaire E57


Hello Daniel Huntley - Typically error code E59 indicates that that washer is not detecting a tacho signal for about three seconds. Contact a professional to move forward accurately. Certified technicia will need to remove the belt from the motor, spin the motor pulley, diagnose the speed control board and etc.

Jan 07, 2013 | Frigidaire Affinity ATF8000FE

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

752 views

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8221 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1482 Answers

Brad Brown

Level 3 Expert

18664 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...