Question about SanDisk Sansa E280 MP3 Player
Can I use a class 10 micro card or must t be a class 2 mirco card?
Posted by Anonymous on
Remove the SD card and try this;
Run the recovery tool from the SanDisk website. Make sure you select "format" when prompted.
You need to put the device into "recovery mode" before you run the tool.
- Turn the device off (hold power for 20 seconds)
- Slide the hold switch into "hold" position.
- Press and hold the "record" button while connecting it to your computer. Keep holding the "record" button until you see the "new hardware found" on your computer.
Then run the recovery tool. Select format when prompted.
Best of Luck.
Posted on Nov 13, 2007
SOURCE: Trouble with expanded memory
The Sansa Express was only designed to hold up to a 2 GB Micro SD card because that is as much expandable memory it was meant to read. Anything bigger as in your case will cause the player to go slower than normal as it tries to read the card and after a while, it will most likely freeze. If you try it with a 2 GB Micro SD card, it should work.
Posted on Apr 04, 2009
Tips for a great answer:
Feb 29, 2012 | SanDisk Sansa E280 MP3 Player
Feb 18, 2011 | SanDisk Sansa e270 MP3 Player
Apr 06, 2010 | SanDisk Sansa E280 MP3 Player
Dec 10, 2008 | SanDisk Sansa MP3 Player
Oct 02, 2008 | SanDisk Sansa E280 MP3 Player
Jan 08, 2014 | SanDisk Sansa E280 MP3 Player
Usually answered in minutes!
Step 2: Please assign your manual to a product: