Question about Canon PowerShot S70 Digital Camera

1 Answer

My Canon PowerShot S70 doesn't works any more after an accident

My PowerShot had felt down on the road,
Now it can't even be turned on, I would like to now how to open my PowerShot, I think that there is a small problème with the connectors...

Posted by Anonymous on


1 Answer


  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have same problem.... nearly ready to dismantle it - poetntial repair costs are too high, camera has little value. Does anyone have a repair manual???

Posted on Feb 04, 2008


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2009 hd road king what is throttle by wire

Electrical signal sent from. The throttle to a servo ( small electric engine) that opens your throttle to the matching speed you are telling it to go.... Think of it like one of those old turn style light dimmers...

Jun 20, 2018 | Road Motorcycles

1 Answer

Check Engine Light came on 2002 toyota avalon no problen noticed in performace?

mcdevito75 here, Even with no problems seen or felt, have your local repair shop look and run a scan on your car, saves trouble down the road.

Jun 19, 2010 | Starbucks Saeco Italia Digital Barista...

2 Answers

2001 Chrysler Town & Country Van: When exiting the freeway at 70+ mph (daylight - dry concrete pavement, I realized I was going too fast to(comfortably) make the turn to the crossing road. I began...

It was the ABS system kicking in to try to keep the wheels from locking up. The squealing you heard was indeed the tires "sliding" across the surface in protest/resistance to your turning input thru the steering wheel. If you are not comfortable with that feeling go ahead and take it to the dealer/repair shop and have the ABS system checked/tested. (preferably the dealership)

Jul 20, 2009 | 1996 Chrysler Town & Country

1 Answer

I keep replacing the dryer belt, due to it keeps getting stretched out, how can i prevent it stretching?

There are only two things that I can think of, both related. 1. The drum is turning with difficulty. 2. The drum is dropped down in the cabinet letting the belt be loose. Open the dryer door and feel around the opening just inside the opening. Feel for the felt seal. Is the gap even top and bottom? My guess it's not. If not, he top part which is the support for the front of the drum is worn out, letting the drum tip down and loosen the belt. Check the rear bearing. With the belt loose, pull up on the back end of the drum. Does it move up and down in the bearing. If it does the rear bearing needs replaced. Both are simple to do.

Jun 06, 2009 | Maytag ADE7005AYW Dryer

1 Answer

Lens problem

you should have dropped your cam down to the floor or you should have forcibly tried to put your lens inside when the servomotor lens tried to bring the lens out..take your camera to the nearest service should not try to open the cam since the parts used in it are very small and even a slight modification might be responsible for huge change in the my best advice is to take it to the nearest service centre available..

May 26, 2009 | Canon Powershot A1000IS 10MP Digital...

1 Answer

Engine seized driving down road, now won't even turn over

The 3 liter mitsubishi is pretty prone to this actually. You would have to tear it down to see what happened, but yes it's likely that you have a bent valve and/or hole in the top of a piston from a valve.

Jan 10, 2009 | 1998 Dodge Caravan

2 Answers


Mentioned on my blog that the last paragraph of the advisory states:

""PowerShot A530 and A540 digital cameras affected by this phenomenon will be repaired free of charge, regardless of warranty status. Accordingly, if the opening/closing spring on the inside of the battery cover of your PowerShot A530 or A540 digital camera sticks out, please do not use the camera. Instead, please contact a Canon call center (1-800-OK-CANON) at your earliest convenience."

But also mentioned that if they don't help, a temporary fix is to insulate the spring from the battery contact plate. Merely place a small piece of tape between the portion of spring that's sticking out and the metal battery contact plate.

Sep 09, 2008 | Canon PowerShot A530 Digital Camera

1 Answer

Tumble dryer fault

usually this is a sign the felt bearings on the drum, or the roller bearings under the drum are worn and need replacing
felts and rollers should be visible once you open the case
check the rollers turn freely, check the felts are not worn through
replace both rollers or both felts if one is worn

Jul 01, 2008 | Zanussi TC7114W Electric Dryer

1 Answer

Frozen lens and shutter

Press the power button on and hold it down while extending and twisting the telescopic zoom lens. It might fix your problem. In any case it could not make it worse Good luck!

Sep 06, 2007 | Canon PowerShot A510 Digital Camera

Not finding what you are looking for?
Canon PowerShot S70 Digital Camera Logo

Related Topics:

273 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

old marine
old marine

Level 3 Expert

2281 Answers


Level 3 Expert

13434 Answers

Poul Brinchs Larsen

Level 2 Expert

159 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides