Question about Office Equipment & Supplies

5 Answers

Code SC320 I have a functional problem come up on the display and the code used is "SC320" can you tell me what this code is for, because the book doesn't tell me.

Posted by countrygirl9 on

  • Saralung Nov 30, 2007

    Yes, I have same problem with code SC320 "functional problem" on the display. Also I already follow the instruction to" turn off main power switch and then turn it on" but the problem still occur. By the way our photocopier is Ricoh Aficio 1018 and there is no troubleshooting instruction for this problem on the manual.

    Thanks
    Sarah Lung

×

Ad

5 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I'd exprience the same problem once. what i did was to change polygon size laser. its working perfectly now

Posted on Nov 03, 2009

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Laser motor trouble

Posted on Aug 11, 2009

Ad

bbr_shaheen

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

Error cde 320 ricoh 250

Posted on Sep 15, 2011

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Qjhw

Posted on Dec 30, 2009

CheckitRight

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Master
  • 1,363 Answers

You did not specify what machine you have, but I beleive it is a Ricoh. take a look at this link:
http://www.tecnodigitale.com/riparazioni/pdf/Codici_errore_Ricoh.pdf

Posted on Nov 01, 2007

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lanier 5635 error code displaying a SC320


sc320 on the Lanier 5635 is a laser unit error code. Often if you power cycle the machine (turn it off with the orange power switch on the left side of the copier, wait a few seconds, then turn it back on) the code will clear and the copier will resume normal operation. If the error code comes back or doesn't clear, you'll probably need to replace either the entire laser assembly or the polygon mirror motor inside the laser unit. These are best done by a professional -- contact your local Lanier service company if the problem persists.

Oct 15, 2010 | Lanier 5222/27 Laser Printer

1 Answer

Sc320 functional problem


YOUR PROBLEM IS IN THE LASER ASSY. FIRST GUESS IS THE POLYGON MIRROR MOTOR.IS SLOWING DOWN AND NEEDS REPLACING.USUALLYYOU CAN HEAR A WHINING NOISE AS
THE MOTOR REVS UP APPROX.30000RPMS. SC320 DOES NOT MEAN THE SAME THING FOR EACH MODEL BUT IT DOES MEAN A PROBLEM IN THE LASER UNIT

Apr 29, 2010 | Gestetner Office Equipment & Supplies

3 Answers

Printer shows error CH551


Is this actually a Ricoh Aficio 1013F, or another model, because "CH551" is not a ricoh service code?Do you mean "SC551"
If so, this is a fuser "triac" problem (basically a fuse in the heater unit). It can only be reset in service mode after the problem is fixed...and will require a tech.

May 21, 2009 | Ricoh Aficio 1013F Copier

1 Answer

We have a gestetner DSm622sp we are getting an error code SC320.


Hello sir; the error code you have display, that's means laser motor don't work, replace it!

May 18, 2009 | Gestetner DSm515pfd Digital Copier -...

2 Answers

Functional Problem SC321-00


What is the actual code. Your heading says '321', then you list "320"?
"320" is the polygon (laser motor) that is defective. "321" is more likely the BICU board.
Could simply require the LD pitch adjustment be performed, depending on what else you have done. Do both the 400dpi, and 600 dpi. initial setting
SP 2109-3 (400 DPI)
SP 2109-4 (600 DPI)

Mar 30, 2009 | Ricoh Aficio 450 Copier

1 Answer

Ricoh Aficio 2027, Service Code 320


dear sir; the error code 320 on ricoh af 2027 it's means laser polygon motor problem, the laser unit right under the toner unit, litlle bit left. some error code can be reset why don't give them a try
1, power on the machine
2, press "clear mode"( has the c in a diamond), "107"then press and hold down "clear/stop" key
3,turn power off 10 second later back on.
I f reset doesn't work, you need to replace laser motor. thank you
HAVE A HAPPY HOLIDAY

Dec 17, 2008 | Ricoh Aficio 1035 Copier

1 Answer

Ricoh Aficio 1018 photocopier


For the Aficio 1018. SC-320 is laser failure - the polygon mirror motor inside the laser has failed and needs replacing. You will need to contact your nearest service agent for repair.

For your RICOH Aficio 1013F - SC-551 is overheat in standby mode as far as I can tell. The circuitry that controls the fuser section ie manages the heat has problem. Unless its right near a source of heat like a heater or has no circulation around you machine you will need contact a repair agent for this machine also.

Mar 18, 2008 | Ricoh Aficio 1013F Copier

1 Answer

Ricoh Aficio 1018 photocopier


Hi it is the polygon motor failure error

2nd motor down on this link is what you need.

Nov 30, 2007 | Office Equipment & Supplies

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

1,468 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

The Knight
The Knight

Level 3 Expert

76280 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...