Need subwoofers for a chevy s10 spaceis a concern andiwant to know just what kind would fitwell.and an ampalso

Question edited for clarity.
Question moved to model category.

Fuse 2 on the right side

Chevrolet ZR2 S10 1991 Fuse Box/Block Circuit Breaker ...

CarFuseBox https://www.carfusebox.com > chevrolet-zr2-s10-1991...

Nov 30, 2022 - Chevrolet ZR2 S10 1991 Fuse Box/Block Circuit Breaker Diagram ; 2, CIGAR LTR, 15A, Cigar Lighter and Data Link Connector (DLC) ; 3, CRUISE, 10A ...

..

Please contact to a nearby chevy dealer.

limited info generic answer --no yr of vehicle or model s10 pick-up or blazer ------check paper work for cross reference wiring to your truck or customer assistance

possibly a faulty injector for the miss but if you have a head/headgasket problem it would account for the exhaust. Do a compression test and radiator pressure test to eliminate that area of concern

there are many things that can cause this, fuel pump or filter, fueses, or even your key. your key has a transponder in it that lets the blazer know you have the right key and not just some screw driver. if you have too much stuff on your key chain it will interefere with this, or if you had to have new keys made. check with your local chevy dealer if you have a concern of this or need to prgram a new key

What kind of problem? Not turning on, not fitting, clipping? Gotta give details if you need help, there are about a million reasons there would be problems!

The ball joints are going to be hard to due if you due not have an arbor press in your garage. They are not the kind that you can replace by yourself unforuantely without a press to press them back into the control arm. If you know a good cheap mechanic this would be a good route becuase a shop is going to charge you an arm and a leg to press these ball joints back in for you.

should work by just grounding to any metal on vehicle.

if its the rear seal where the driveshaft enters the trans you need a transmission output seal for the tailshaft housing.