When I look through the LCD, the coloring looks like a cross between black and white and sepia, although it is in color mode. (I have checked and double checked several times) I have taken pictures anyway, and the color is bad off (kind of brownish with a hint of color). I don't see a solution in the menu setup for this problem. Please advise!! Thanks!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The SP 800UZ doesn't have a black-and-white or sepia mode. You can convert a color picture to black-and-white or sepia by editing the picture on the camera. Full details are in the "Edit" section of the manual (page 38 in my copy). If you need a manual, you can download one from the manufacturer's web site at
In general, you're better off converting to black-and-white or sepia using photo editing software on a computer rather than doing it on the camera. The computer will give you much better control over things like brightness and contrast.
I replaced two convergence chips the resistors were all fine. This took care of the 3D look. I also replaced the coolant in the blue and green although it was the blue which was badly contaminated. The picture is now clearer than before but I am unable to get color. I can see vibrant colors when I pull up the TV's menu. I can see the colors in the convergence menu as well but no color in the picture. The color controls only make the picture brighter or darker. It is sepia in color not black and white. What could this be?
ur CCD is going BAD u shud contact Kodak for the problem they might do it free i had same problem in my Fuji S5000 all pink shades in pictures , in sepia and black and white there are no multiple colors so u cant see the full performance of CCD becoz they are one or two colors only , pls contact Kodak they will do it free ask them about bad ccd see link and PLS RATE ME WELL ! http://www.imaging-resource.com/badccds.html
Unfortunately the camera does not have a menu option to take images in black or white or sepia. You can take them in color and then using photo editing software modify the image to be monotone or sepia in color.
you have lost your chroma (color) circuit the sepia you are seeing is just the black & white picture black and, white is adjustable from red to blue to green tint so; your sepia is an overloaded red circuit i could fix this but, i'm here and, you're there so take it to a serviceman it should not cost much more than $100
What the manual doesn't tell you is that you need to change the REC mode first to be able to fint the buttons in MENU.
Fist go into the REC mode (the one above menu when taking a photo). Change this to PGM and click OK. Now go into MENU, on the 3/4 page second button down should be a box with a + in the corner. This is the colour mode option. You can now change to vivid, sepia or black and white.
You might have "color filter" settings. Turn the digital filters off. Here is what manual at p72 says.
"You can take pictures using digital filters. The filters consist of color filters such as red, blue and green, a soft filter that produces a fuzzy effect. Color filters Eight colors, black-and-white, sepia, red, pink, violet, blue, green and yellow, are provided for the color filters. When you select a color filter in the Digital Filter mode, the display on the LCD monitor is filtered with the selected color, and the pictures are taken in that color."
With P, A, S, M, mode, (set using the exposure mode dial) the following four modes can be selected to suite the image. Vivid color is to be selected to produce more vivid image than the natural colored image (default), Black and white is to produce monochrome image in black and white, and Sepia is to be if it should be the sepia tone. Also, they can be selected in the movie recording.*The color mode of the saved images cannot be changed. They should be selected before recording. *Automatic Digital Subject Program and AUTO can not select them. (natural color only)