Question about Samsung LN-S4092D 40 in. LCD HDTV
Changing channels and the screen went blank it is saing weak or no signal
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: weak or no signal message
Posted on Nov 18, 2008
If you just have over-the-air signals from local broadcast stations, you need a good VHF/UHF antenna connected to the RF input jack on the TV in order to get reception. If you have access to cable TV or satellite, you need to connect the box or receiver set-top-box to the TV using a HDMI cable. You need to select on the TV using the remote, (press the MENU button) setup for tuning channels. Do a scan after setting to AIR or CABLE so the TV picks up all available channels you can get. Once this is done you can change channels and see TV. If you reply back with specifics, I can help more...
Posted on Mar 29, 2011
Tips for a great answer:
Feb 01, 2018 | Toshiba Televison & Video
Mar 29, 2011 | Samsung UE32B6000 32" HDTV-Ready OLED TV
Feb 06, 2010 | Samsung LN-T4061F 40 in. LCD HDTV
Sep 06, 2009 | iLO IWT3206 TV
Jul 06, 2009 | Vizio VO47L 47 in. LCD TV
Sep 12, 2010 | Samsung LN-S4092D 40 in. LCD HDTV
38 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: