Question about Siemens Gigaset 4000 Phone

1 Answer

Siemens gigaset A410 problem with some hardware

I am facing the problem with A410 set of siemens. when i am connecting the cordless phone to line it is ok. After first incoming call. it is showing line in use. so afterwords i am not recieveing any call from my set. But when again i am switchinh off my phone and again connecting to telephone line. it is working file till first incoming/outgoing call. afterwords again showing line in use.
kindlly tell me the solution.
i am staying in Navi mumbai. so guide me or provide me the contact number and address of your repairing center.
Thanking you
sanjay

Posted by kpsanjay on

  • Anonymous Mar 15, 2014

    Changed to VOP from cable provider as voice line source. Older Panasonic PBX used to be analog land line as input. In bound phone calls function normally on all phones connected to the PBX. None of the phones will connect outbound to allow an outgoing phone number to be placed. Problem is the PBX as a phone at the PBX input jack will allow an outgoing call.

  • Anonymous Mar 15, 2014

    Changed to VOP from cable provider as voice line source. Older Panasonic PBX used to be analog land line as input. In bound phone calls function normally on all phones connected to the PBX. None of the phones will connect outbound to allow an outgoing phone number to be placed. Problem is the PBX as a phone at the PBX input jack will allow an outgoing call.

×

Ad

1 Answer

Chris Barclay

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 106 Answers

Your unit got hit by a lighting strike, but it is fixable. Go to www.cordlessrepair.com

Posted on Jul 04, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to lock handset


You should look up function in your user's manual. If you can't find it, you can't lock handset:


Manuals Gigaset

Manuals Gigaset

Manuals Gigaset


Siemens Gigaset A490 White Cordless Phone Unboxing

Aug 28, 2015 | Siemens Gigaset A490 Twin Cordless Phone

1 Answer

Why wont my cordless phone work no reception?


The cordless phones have to be registered to the base station (the part connected to the phone line). Perhaps they are not registered. Check you documentation for information on how to register them.

Jul 27, 2014 | Siemens Gigaset E455 Cordless Phone

1 Answer

Siemens Gigaset 4200 Cordless keep searching for base


The handset should be returned to the charging station, let it set for a few seconds. If this is a satellite phone, make sure the main phone "base unit" is connected to phone outlet and plugged in. After the phone has established its physical connection with the base again you can remove it and use it like normal.

May 18, 2012 | Siemens Gigaset 4200 Cordless Expansion...

1 Answer

I had switched off my Gigaset C200 for one week and when I switched it on again so still flashes "base 1" on the phone's display. I tried manually connect to the base with PIN 0000 but still...


YOU SHOULD HARD RESET THE UNIT

When restoring factory settings:
u Handsets are de-registered
- When resetting via the menu:
all Gigaset handsets
- When resetting using the key on the
base station: also all handsets of
other GAP capable devices
u Individual settings are reset
u All lists are deleted
u The system PIN is reset to the original
code 0000
u Eco Mode+ is deactivated
Only the date and time are retained.
Resetting the base station via the
menu
₪ Settings ₪ Base ₪ Base Reset
§Menu§
§OK§
Press the display key to confirm
SIEMENS Gigaset C380 User Giude Restoring The Base Station To The Factory...

Dec 27, 2017 | Siemens Gigaset C200 Cordless Phone

1 Answer

Siemens Gigaset Cordless Phone Permanently Engaged


make sure that all other phones have been cancelled properly after use
any set hung up with out pressing the end or stop button will keep all phones engaged

Jan 22, 2018 | AT&T Siemens S46 GSM Cellular Phone

1 Answer

Siemens gigaset 2420 two line phone drops calls


dump the memory by deleting your mailbox and your call log-

Feb 15, 2009 | Siemens Gigaset 2420 Cordless Phone

1 Answer

Line cut off problem


That is a common problem with this model, normally happens after a storm passes through. Unfortunately there is no easy fix for on site, it would need to be sent in for repair or replaced. You can google Siemens Cordless Repair to find service facilities.

Dec 18, 2006 | Siemens Gigaset 2420 Cordless Phone

Not finding what you are looking for?
Siemens Gigaset 4000 Phone Logo

655 people viewed this question

Ask a Question

Usually answered in minutes!

Top Siemens Lands Phones Experts

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6082 Answers

Marvin
Marvin

Level 3 Expert

85231 Answers

Are you a Siemens Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...