Wish I had better news, but the information I found on this says, "E301-0001 Insufficient light intensity in shading" - the details I've summarized below. See the website listed for a full list of error codes. Best of luck with it!
-------- Quoting --------
When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies.
(1) Check the connection of Flat Cable between Main Controller Board (J5) and Contact Sensor.
(2) Replace the Flat Cable between Main Controller Board (J5) and Contact Sensor.
(3) Replace the Contact Sensor.
(4) Replace the Main Controller Board.
----------- End Quote ------------
Sure hope its just a loose cable...
Mark
http://printcopy.info/?l=en&mod=free&chap=erc&brand=Canon&model=MF4412
×