Fault 16 light 00010 000

Forget the other flash codes, this is the main one you need to diagnose an fix.

B1681 PATS Transceiver Module Signal is Not Received PCM GO to Pinpoint Test E .
Do you know how to do electrical testing using a Voltmeter?

E2 CHECK THE PATS TRANSCEIVER FOR VOLTAGE CIRCUIT 16 (RD/LG)
PATS Transceiver C2097
Measure the voltage between the PATS transceiver C2097 pin 2, circuit 16 (RD/LG), harness side and ground.

• Is the voltage greater than 10 volts?

Yes GO to E3 .

No REPAIR the supply circuit. CLEAR the DTCs. TEST the system for normal operation

Anti-theft is known to be an issue. The only way to correctly diagnose is to call a mobile auto-electrician. His pro grade scan tool computer can diagnose and record faults as they happen, plus show all the historical data that may be saved. The attached video may also help.

https://www.google.com/search?q=1999+Ford+F-150+theft+code+16

What does the ford f150 theft code 16 mean? - Vehicle History

https://www.vehiclehistory.com > questions > what-does...
4 answers
The Ford F-150 theft code 16 means that the anti theft system has been triggered, and the car will not start. This system is known for being finicky, ...

It means a fault exists in the ABS system have the system scanned for fault codes.

Same as every other problem anyone has had since 1981
some 32 model years

Always start by checking for codes

You do have a check light on

Hi Dan, The flashing light means that a fault or faults have been recorded. Take the vehicle for a diagnostic scan and that will pin point the problem(s) Regards John

Look on the inside panel of furnace and it will give you a list of trouble codes /flashes and the meaning of the fault. Let me know what fault it is saying and maybe I can guide you further to fix this problem.

If the original light flashing that means it indicate a fault in the heating circuit. Heater, wiring, thermistor / pcb. (Main control board).

The new flashing light, PreWash (this is the only one on my list for a fault code indication). indicates a fault with the thermistor.

You would need to check by taking the door apart that the thermistor hasn't come off it's mount by the dispenser.

You would then need access to and be able to use a multimeter to test the heater and wiring to ensure they are closed circuit.

This means that either your co2 is empty or your battery is dead try them first usually that is the problem

count the number of flashes- this indicates fault ie will flash 4 times stop, flash 4 times stop. To clear fault, hold start button for 3 secs. Try running another fast cycle- if fault reoccurs count flashes: Number of flashes:1=NTC fault, 2=Flood switch activated, 3=Heating fault, 4=drain fault, 6=water inlet fault, 7=flow meter fault, 8=water level fault

Didn't actually find any fault, I just held the three buttons in together on the front for a short period of time and it reset itself. Technogolgy??