- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You will have to either remember your password, or reset your wifi back to factory settings and set up a new password. In order to clear the "code 011" error, you will have to hold the reset button down on the Roku for at least 30 seconds to do a factory reset. But, don't do this until you get your wifi password issue squared away first.
Wire in a cable with the router from ur laptop/desktop. Check the default gateway of the connection. Then put the ip address in the explorer window and try to log in to the router with the username and password. If you remember the credentials then login and under security settings or wireless security you will see the password. But if u forget the credentials then u have to reset the router and reconfigure the wifi router again with a new password.
Many routers have a sticker on their belly with the default password.
Newer routers often have a reset switch to restore default settings.
(needs to be held down for 10-15 seconds). Most router makers host support websites; look up by model#. Good luck!
The D-link support desk can help with the default password to the unit, but can not tell you what your wifi password is. If you have a device on wireless you can go to the wifi adapter and usually check a box that says "show password in text". If that is not an option, log into the D-link and change the wifi password to something you know and can remember.
Note: changing the wifi password will break the wireless connection to any existing thing that uses wifi. You will have to go to each device and change them to the new password.
You didn't supply the Make, Model of wireless. Reset the wireless device. Push and hold the reset button for 30 seconds or so, release. This will reset to default settings. Reconfigure the SSID and Security. You may want to write down the password for future use.
you need to log into the router
go to internet explorer window and type in 192.168.1.1
go to the security tab or wireless tab and setup a wep or wpa key
now remember (WRITE DOWN) this code because any of your computers that you want to use with wifi you have to go in and enter this password in order to connect to the network