Camsew typical GC0303 sewing machine

Unfortunately, I couldn't find a specific manual for the Dial and Sew 750 sewing machine. However, I can give you some general instructions on how to use a sewing machine that may help you get started:

1. Threading the machine: Follow the threading guide and thread the machine correctly. Make sure that the presser foot is raised when threading the machine so that the thread can be properly tensioned.
2. Winding the bobbin: Place the thread spool on the spool pin and wind the thread onto the bobbin by following the instructions in your manual. Make sure to cut the thread once it's wound.
3. Installing the bobbin: Open the bobbin case and place the bobbin inside it, making sure the thread is coming off the bobbin in the correct direction. Then, pull the thread through the slit in the bobbin case and hold onto it.
4. Adjusting the stitch length and width: Depending on the fabric you're working with, you may need to adjust the stitch length and width. The stitch length controls how far apart each stitch is, while the stitch width controls the width of the stitch. The controls for adjusting these settings will be on your machine, typically on the front or side of the machine.
5. Sewing a straight stitch: Practice sewing a straight stitch by lining up the fabric with the edge of the presser foot and slowly pressing the foot pedal. Keep your hands on the fabric, guiding it through the machine. Be sure to sew at a consistent speed to maintain even stitches.
6. Using additional stitches: Many machines have a variety of stitches you can choose from. Consult your manual to learn how to select different stitches and adjust the length and width settings.
7. Finishing your sewing: Once you've finished sewing, cut the threads and remove the fabric from the machine. You may also need to clean the machine and oil it, depending on the manufacturer's recommendations.

Remember to always consult your manual for specific instructions on how to use your particular machine. Good luck with your new sewing machine!

Instructions are typically brand/model specific. Your machine user manual should instruct you on how to adjust needle position. said, here is general information:

https://www.thesprucecrafts.com/understanding-sewing-machine-needle-position-2978318

The following link describes adjustment on Brother sewing machines. It illustrates why knowing the brand is significant:

https://help.brother-usa.com/app/answers/detail/a_id/56111/~/how-to-set-the-needle-to-center-position
https://www.reddit.com/r/sewing/comments/73fnku/why_isnt_my_machines_needle_centered/

Typically, the symbol is a representation of the stitch result. To learn the most about your machine, sit down and prepare a sample stitch out of each stitch and keep in a manual.

Order Instruction manual
http://www.sewingpartsonline/

try these links for a manual

New Home Sewing Machine Manuals Instruction and Repair Manuals

Janome New Home sewing machine instruction manuals


Downloadable Sewing Machine Manuals


http://sewingonline.co.uk/instructions/newhome1


Sewing Machine Instruction Manuals Sewing Parts Online

Here's a pdf of your manual Singer owns White's manuals now.
http://www.singerco.com/uploads/download/864_white-970,972,979-x-.pdf

Typically you need a longer stitch to sew thicker fabrics, have you tried that yet?

If you have you instruction manual look in there. If not, your sewing machine was distributed by Sears. Gather numbers from the machine (on the label on the back typically) and search for the instruction manual at parts.sears.com

Good luck.

Judy. AN647555 is the serial number of your machine. I'll need a picture to help you identify. Manuals are not found typically in the regular area at singerco.com

Picture please and I'll direct you to the right area.

Industrial machines typically don't have an instru
ction manual like a home machine does. Go to Juki.co.jp and see if they can help you locate what you need.

Hi
I couldn't find any manual for you for your machine.
I did find an online threading guide, but I expect that it is the same as your manual.
http://www.sewusa.com/Threading_Diagrams/Threading_Pages/Necchi_Sewing_Machine_Threading/Necchi_3537_threading_Diagram.htm
The drawings don't look too bad, they are quite typical of most sewing machine manuals!
I find videos on www.youtube.com more useful for my machine in terms of the different feet and what they do as well as the different techniques to try. Just type in the search box what you are looking for, e.g sewing zippers, sewing buttonholes etc.
Hope this helps!