I have a Uniden phone that has 2 outlets, it only shows a red ligtht blinking on all of them but can't receive any calls on them, I do have another phone on the computer that is a vtech, so have to

SOURCE: uniden 5.8Ghz phone.

You need to reset the main base unit. Unplug the power from the back of the base. While the power is disconnected, press and hold the delete key while reconnecting the power. Wait for a long beep tone. When the display shows 88 or P, press play button one time. If you have a phone without an answering machine, disconnect the power from the back of the base, press and hold find hs button while reconnecting power.

SOURCE: Phones stopped working. They only read

I'm not familar with the Vtech but I would suspect that all 4 units work off of the answering machine base. It sounds like it is seeing a dial tone.
Take a working phones like the wall phone, if it is easily removed, and use a known good connecting cable between the good wall phone and the jack that the Vtech is plugged into.
If that works, take the connecting cable loose and replace it with the Vtech connecting cable. If that works check the jack on the Vtech for crossed wire. If non found, connect it to the jack the wall phone was plugged into. If this doesn't provide satisfaction, let me know exactly what you did and what happened and we will go from there.

Steve Williams

• 77 Answers
• Posted on May 31, 2009

SOURCE: Phones stopped working. They only read

first step is to unplug all power and phone connections from the wall for all Vtech phones and bases.

Second,plug each set and base in the wall for power one at a time.

Go back to the basics and pair the handset with the base of the unit.

Do this for all sets one at a time.

SOURCE: my vtech cordless phone will not ring. message is ringer off. how to turn ringer on.

Does your handset have a PROG button? Press that, then press the VOL+ button until you come to RINGER VOL: OFF. Press SELECT button, then use the ^ (VOL+) key until you get the desired volume level. Press SELECT again, then OFF. You're good to go.

SOURCE: hi, how do you turn the ringer on of vtech 5.8 GHZ

http://www.retrevo.com/d/ds/progress?doc=415c14b0b538f65e013116610ddd5a8a

Click on the above for your manual and go to p7.
Hope it helps!