I replaced Black ink cartridge. Now both ink lights are blinking with a P02 error, a paper error & cartidges do not move to correct side. I tried reset, unplug,power off, cleaned cartidges and still got no where. Any advice?
SOURCE: c43sx both lights on
If your PC is connecting to it normally (no connection errors), it sounds like you printer is having the service reset hardware problem. Try installing the EPSON reset software and check all counters and error codes.
Try this one which fixed mine:
http://www.ssclg.com/epsone.shtml
Good luck...
SOURCE: Blinking Lights
Follow HP's instruction listed at the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00405441&cc=us&lc=en&dlc=en&product=445440&dlc=en&lang=en
Post back if this did not help.
& please vote...
SOURCE: cartridge error
Hi there,
I would like to provide you a weblink of a document related to the Cartridge error that you are experiencing which would be helpful for you.
Here is the weblink:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00428054&cc=us&lc=en&dlc=en&product=441125&dlc=en&lang=en
Please refer the document and let me know the result with the exact message displayed on the All-In-One.
With Regards,
Ashesburn..
SOURCE: MP610 PRINTER ERROR 6A00 LIGHTS FLASHING
You can try to reset it back to factory by removing the printhead and all cartridges.
Power off the unplug from wall for 30 min.Reverse procedure and see what happens.
From what I am reading is the carriage will not lock on the left!
Correct?
Try this and let us know.
281 views
Usually answered in minutes!
I'm sorry it's a Canon MG 3200
×