How to fix 0094 error code

Check the transfer roller assy and the transfer belt sensor cover

The counter data on one card does not match counter data on a different board did some one try to reset the counters to make the machine newer???? Need to get tech out to try and rewrite the firmware,

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Re: error code 0094 on a Konica Minolta C35

Make sure the second transfer release solenoid isn't hanging up due to the pad that's there to minimize noise. See the attached pic. This pad had gotten sticky enough that it was delaying the action of the solenoid. Took a lot of service calls to figure this out!
Attached images

• C35 Picture of pad to remove.JPG (169.2 KB, 370 views)

sir/mam replace the cart then might have gotten a bad one from the store

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Cyan (Blue) Toner level sensor error, using OEM toner???? or third party?

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

no such code for that machine bizhub 350

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

which is it c35 or c351

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

If you are talking about windows updates, then you can download a hotfix from microsoft from here

This video will show some of the most common causes for Bizhub C35 misfeeds
https://www.youtube.com/watch?v=Sbo0gon8EIY

I’m happy to help further over the phone at https://www.6ya.com/expert/mark_3d8ef710fe85c567

I HAVE A PRINTER SAMSUNG ML 2550 ERROR CODE MDLCRUM 0094