Question about Casio Exilim EX-S600 Digital Camera

1 Answer

Blank screen I have a blank screen What now? where can I call for info? Every thing seems to work bot the screen

Posted by oldhippy on

  • Shoofreak Nov 12, 2007

    I have the same problem. Please help!

  • FixCasioS600 Nov 16, 2007

    I have the same problem. The viewing screen backlight activates (appears black/dark grey) but will not display stored photos or the current view when the shutter is open or focusing. The camera will take still photo's or video but when the files are reviewed (on a computer) they appear the same as the display screen, black.

    The camera zoom telescopes in and out without hesitation. But I noticed a unfamiliar gear noise right before a picture is taken starting from the time the shutter button is held down and stopping just before the photo is taken. The noise may have been there the whole time but it wasn't noticed until recently when I was trying to diagnose the problem.

    About 40 pictures before the camera stopped functioning a black dot appeared on the digital images and the dot got larger as the zoom increased. The dot was present on the viewing screen of the camera and the digital images.

    This camera was sent into casio service ($125) to fix the diaplay screen the mysteriously displayed a large black ink dot (size of a dime) 4 months after purchase.

    Any advise that could save another trip to Casio Service would be greatly appreciated. --- Bryan Smith



1 Answer

Misty Hoffman

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 374 Answers

Sounds like all of you are having trouble with your LCD either going out or already gone out. U will have to send it into Casio to have them fix it.

Posted on Nov 26, 2007


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Screen lights up but is blank

well it could have some water damage or maybe is the flex cable the one the sends de info from the logic board to the lcd...its about 5 bucks on ebay.......good luck

May 24, 2013 | LG Ally Cell Phone

2 Answers

Laptop screen has gone blank

I assume that your laptop's display has been damaged. Are you sure that other things are working normally? If other components are working, then problem will be with the display unit. Try to repair or replace with new one.

Nov 28, 2012 | Compaq Presario CQ56110US Laptop

1 Answer

Backlight working but Display still blank, what could it be?

If you connect an external monitor to the video port on your laptop, power up the monitor first and then boor up the laptop and the video information will automatically display on the external monitor. This will indicate the on-board video is functioning OK and the problem is the video connection to the LCD screen.
The video connector from the LCD screen may need reconnecting to the motherboard to restore video information on the LCD screen.

Sep 09, 2012 | Sony VGN-CR220E/L Notebook

1 Answer

HP Pavilion Elite M9040N will not finish loading windows after green bar just goes to blank screen. tryed to restore to factory spects bot same thing.

possible video drivers are corrupt.Try a reboot and hold f8 key down.
When prompted choose start in safe mode,then reboot again as usual.

Aug 30, 2010 | HP Pavilion M9040N Elite Desktop PC

1 Answer

No spark all ohmeter checks ok

4-pin upper left=blu/wht
upper right=yel/wht
bot left=blu
bot right=yel

6-pin upper left=yel/with blue stripe
upper right= green
mid= blank
mid= blank
bot left=blu/with yellow stripe
bot right=blk/wht

can you rate this thanks!

Apr 29, 2010 | 1987 Honda CBR 600 F(1)H

1 Answer

Blank screen

i think u still have ur warranty period active.. if u do jus take ur cell to thje service station and tell them tat the screen went blank all of a sudden... dnt tell them abt ur steam things and all... since u have ur warranty period ur screen wld b changer free of cost... suppose if u've bot ur cell recently then fight 4a replacement in the service station... jus tell them its the manufacturers fault and u didnt do anythin... u have chances to get it replaced... or change ur screen... but nvr tell them tat u took it into a steam room... remember 4 all samsung mobiles, if u service ur mobiles 3 or more tmys in a single service station then ur cell has to b repalced within ur warranty period.. its their rule... use it.... b criminal at tyms.. lol... cheers

Apr 11, 2010 | Samsung Star GT-S5233 Cell Phone

1 Answer

I have no LCD screen when my E300 is turned on, it stays blank until I take a shot, the LCD screen shows this shot for a couple of seconds and then blanks again.I can't seem to find the problem in the...

Have you tried pressing the 'INFO' button? This little button will toggle between camera info on display/no info on display (when the display isn't in use to display pictures).

Oct 19, 2009 | Olympus EVOLT E-300 (Double Lens Kit)...

2 Answers

Cdj1000 screen not working


Is it just the main lcd screen that is blank or is the whole player not lighting up.



Jan 08, 2009 | Pioneer CDJ-1000 CD Player

1 Answer

Acer Screen goes blank when fan comes on...Help!!!

It's seems your backlight inverter are busted. Need to replaced a new one...

Nov 27, 2008 | Acer AL1511 15" LCD Monitor

1 Answer

Insignia NS-8PDVD blank screen...

There is a switch on the side of the DVD player that reads "in / out".  Switch it to out and you should get the blue screen back.  It's a strange set up but this is how it works.  

Dec 08, 2007 | Insignia NS-8PDVD

Not finding what you are looking for?
Casio Exilim EX-S600 Digital Camera Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Cameras Experts


Level 3 Expert

13434 Answers

Bill Eager

Level 3 Expert

459 Answers

Jeffrey Groves
Jeffrey Groves

Level 3 Expert

573 Answers

Are you a Casio Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides