How to program a royal 210DX register

Setting the Date:

1. Enter the program mode by sliding the Control Switch to the "PRG" position.
2. Type [the 6-digit number] representing the current date. Use the format MMDDYY to enter the date. NOTE: Single. digit numbers for months and days must be preceded by a zero [0].
3. Press the [#/NS] key to store the date.

Setting The Date And Time - Royal 210DX Instruction Manual ...

www.manualslib.com > ... > 210DX > Instruction manual

there is no ink cartridge on thermal, the paper is what shows the print, with a heating element hitting the paper. If it is not dark enought, try different thermal paper.

check to see if the papers have folded edges or are moist. if they are folded try straightening them out and dry if moist

does it have a keyboard?

Manual: https://www.royalsupplies.com/cashreg/1000ML_Instruction_Manual_eng.pdf

Pages 7 & 8

IR40

It means you are not logged on. Look for the clerk button and log in

Are your departments set up properly?

This is how to check:

Running the Department Confirmation Report

You can print a report that shows the programmed information for a range of departments or for all departments. The range report is helpful if you want to see the programmed names of some of the departments, but do not need to see all the departments and other cash register programming.

You can also print a report that shows department information and sales.

For more information, see Running Management Reports on page 85.

Note:

Unless you specify a department range, all departments print in the
Department Range Report. This will take a few minutes.

To run a department confirmation report:

Programming > Department Set Up > Depart Conf Report

1 Press the Main menu (on) key.

2 Press the Arrow Down key to select Programming. Press the Amount Tend Total <Enter> key.

3 If you are prompted for a Manager Passcode, type the passcode number and then press the Check key. If you did not program a Manager Passcode, go to the next step.

4 Press the Arrow Down key to select Department Set up. Press the Amount Tend Total <Enter> key.

5 Press the Arrow Down key to select Depart C onf R eport. Press the Amount Tend Total <Enter> key.

6 Select how you want to see the report. If you select Display, use the arrow keys to review the report in the clerk screen.


https://www.royalsupplies.com/cashreg/1000ML_Instruction_Manual_eng.pdf

It may be the same as the 110DX, but I couldn't find the manual for the 210DX . This is from page 37 of the 110DX manual. TO CLEAR THE GRAND TOTAL:
1. Set the Control Switch to the "PRG" (Program Mode) position.
2. Type [2], type [0], then press [R/A].
After this operation, the grand total resets to zero.

It means printer error. Usually after a paper jam. Clear any paper out and try turning off and on at the wall. ***************************************************************************** *****************************************************************************
All of these manuals can be downloaded at: http://the-checkout-tech.com/
royal 110cx User royal 115cx User royal 130cx User royal 425cx User royal 435dx User royal Alpha-580 User Programming royal Alpha-583cx User Programming royal Alpha-600 User Programming royal Alpha-600sc User Programming royal Alpha-601 User Programming royal Alpha-710ml User Programming royal Alpha-9155sc User Programming royal Alpha-9180sc User Programming royal TS4240 User Programming